Search results for query: *

Thought I would share my 408 build with my fellow mopar maniacs. I have a 03 Dodge Ram regular cab truck with 5.9 magnum engine. Didn't really need to remove the engine but thought I would let Brian at IMM build me a engine that has some balls. He told me that the engine will be making around...

Recently I added Eddy heads, Air-gap RPM intake, Hughes roller cam and roller lifters to my "LA" 360 engine. The Comp Cam roller rockers that was on the engine are 1.5 ratio and decided to reuse them. I bought these rockers from a member on here at least ten years ago. After mocking up the...

Good day gents.... I just installed a Hughes roller cam into my 360 and one of the lifters is failing to pump up. The lifters that I'm talking about are these Hughes Lifters. I have gave Hughes a call and told them the problem. The response was "There might be a spec of debris inside the lifter...

My best friend has a Jeep CJ (I can't remember what year)which has a 4 banger in it. He just bought a 96 Jeep Cherokee Laredo which has a V8 and was asking me what would it take to install the EFI V8 into the Jeep CJ? The Jeep has big tires and the little 4 banger has just about had enough...

I have removed my oil pan because of a leak between the engine block and transmission. I have already replaced the rear main seal and was going to install the oil pan but something doesn't look right. The pan gasket isn't long enough to make it all the way to the pan seal. Also the seal seems...

Check these bad boys out... go ahead and get them while you can...

I had to buy a set of new Comp Cam roller rockers from scamp 408 since he had them at a great price. Thanks scamp 408!(Good Guy alert!) Here is the #1 exhaust rocker. The first pic is the lifter on the base of the cam and the second is at full lift. I'm going to get the Hughes hold down...

I pulled my spark plugs today and was wondering what you think. Rich,lean or just right? I always need a second opinion because I might think what looks good might actually be bad. Isn't most correct way to read plugs is to shut the motor off as you go down the road, pull over and...

I got the March pulley kit for my 360 and was wondering if anyone has ever changed out the alternator pulley? I realize that the old one has to be pressed off and the new one pressed on but do I have to take the alternator apart?

I can't get the engine to go all the away against the transmission. I have floor jack under the transmission, the engine is still hooked to the lift and have a hoist adjustment to raise the motor (don't really know what you call it but it's the blue thing in th picture). I have tried...

I'm in the process of changing out the 273 to a 360 and while the motor is out I'm going to paint the engine bay the same color as the exterior of the car. So everything from the engine bay has been removed along with the 273. I cleaned all the head bolts, oil pan bolts, intake bolts...

I'm in the process of changing out the 273 to a 360 and while the motor is out I'm going to paint the engine bay the same color as the exterior of the car. So everything from the engine bay has been removed along with the 273. I cleaned all the head bolts, oil pan bolts, intake bolts...

OK I had some bad heads on my 273 in which the valves were not sealing properly and the valve guides would allow the valve to wobble back and forth. This is a motor that supposed to have been rebuilt in July of 06. So I had some casting 302 heads redone with a Comp.valve job and installed them...

I was hoping to let Bobby at BJR racing build be a nice 360 but I can't afford it right now. That would be icing on the cake but I have spent about $6000 or so on the car this year. Bobby is a super guy and I wouldn't want anyone else build my motor but him. I will get to it this coming year...

The previous owner installed a spread bore Eddy intake and a Eddy Performer carb without any spacers. I kept having hot starting troubles and installed a square plastic 1" spacer which help fix the hot start problem. But noticed today while the motor was running that it was whistling noise...

I've pulled the cam out of my 273 and I am trying to find out what the specs are. I talked to the guy that built the motor and he said it was a Crane cam. He can't remmember the specs. So I went to the Crane site and in both part number and grind number I am not showing any cam by Crane. The...

My motor (273 with 500cfm Edlebrock carb) will crank good when it is cold but when I drive the car and let it set for 30 mins or more it will take a while before it will fire up again. It seems to have a hard time to get going after it finally cranks. I'm thinking that the carb is fluiding but...

I bought a 67 Barracuda not to long ago with a brand rebuilt 273. The fellow I bought the car from installed the motor in July. He lived up in NY and moved to GA. My question is that I have goosed the motor since I bought the car. He drove the car from NY to GA and drove it some after the move...

I bought a 67 Barracuda about a week ago with the 273. The motor was installed in July and is a fresh rebuild. The cam however seems to be to mild for me and I have a 4-speed so I can to a bigger cam without no problems. I know that I don't want to go to big because of the (far as I know) stock...