Search results for query: *

  1. C

    Which Cam? Advice needed

    What would you recommend for a 30 over stock stroke 360 with a pair of RHS heads from IMM, an airgap intake, with kb107s? I'm figuring I'd have around 10.50 compression. I haven't bought a converter yet but I'm guessing its gonna have to be in the 3500 range. Its for a 74 dart swinger style...
  3. C

    Need to be balanced?

    Probably a stupid question, I'm using a stock crank, kb107 pistons, and scat 26123 I-beams for my 360. Its .30 over and I don't have a damper, flex plate, or converter yet. Do I need to get the rotating assembly balanced? The pistons and rods are supposedly to come balanced. Thanks!
  4. C

    "awesome" KB 107 surprise

    So I finally started putting my engine together, got the mains torqued down and I decided to start putting the pistons together. Check out these valve reliefs, 5 out of 8 are garbage. Brand new out of the box.
  5. C

    Rods face which way?

    I took my rods out before I sent the block out, and now when I got the block back I forgot how I took the rods out. They are marked 1-8 but I don't know which way faces the front of the motor. other side
  6. C

    Magnum, Magnum R/Ts

    I have a few questions regarding some heads. 1.) Is it a good idea to buy used Magnum or R/T heads? 2.) Where to buy? 3.) Average cost for the used pair? 4.) Same question as the above except the goodies (with rockers, rods, valves etc) I'd rather not buy new if I didn't have too. Thanks for...
  8. C

    Question about 360 blocks

    This might be a dumb question, the Cordoba was introduced in 75 right. I'm reading some stroker literature and it says (for this particular combo) to use a 360 block from 71-74. Cordoba is a year later. Would the 75 Cordoba use the same 360 block by any chance? Or is there even a difference in...
  9. C

    Breather or PCV?

    I just installed new valve covers, the driver side just has the pcv hole in the covers, the passenger side just has the oil fill. What about my breather?
  10. C

    74 dart 318 questions

    Hello, first time poster here. 8) I have a recently rebuilt 318, thats all stock besides the cam, exhaust, carb, and air cleaner. I bought the car with the cam already in it, so I'm not sure what I have exactly. I took apart the whole front of the motor hoping a number was stamped on the end of...
Back
Top