Search results for query: *

I put an ad up wanting a Victor intake for my sb 410ci.Got a deal on a new one that a member had on the shelf for 8 yrs(thanks).I went out to the garage yesterday after reading some threads about how bad these were cast.Sure enough mine is the same,so I,m asking for advise on cleaning/opening...

After 2 seasons and 192 passes on my rockers,I,m thinking about sending the rockers to Comp Cams to get the bearings replaced.Has anybody had this done?How much was the cost?What was the turnaround time?Were you hAppy with their service?Thanks

I,m back with more questions LOL.I have a line on a 1973 360LA engine(carb to pan)Is the 73 360 block one of the thicker cored blocks like a 71-72?It doesn,t matter to me cause I,ll probably be buying this for a stroker re-build.Just thought I,d ask if it,s one of the thicker cored blocks.Also...

Will LA heads bolt(Eddy RPM,s) onto a Magnum block?With most of the early LA blocks gone,I might not have a choice but to use a magnum bottomend.

I,m building a 408 stroker with the Eddy RPM heads which are P&P.I bought the Eagle stroker kit with the H-beam rods.I,m gonna put a roller cam in it.I,m looking for adjustable rockers now,so whats the best bang for your buck when buying these?I appreaciate any advise with which ones to go...

I have some Eddy RPM heads I,m gonna take in for some porting and polishing and thought I,d see what other members have gotten for flow numbers.Also prices.Thanks.

I,m sure this has been asked many times,but here goes.My 77 360,s valves are muchroomed at the top.I can get a pair of reconditioned heads with an exchange for $300.I have .030 flat top pistons and a 480 lift cam.What would be a good head gasket to use to up my compression?Or should I just go...

Gonna talk to a guy I know tomorrow about a low mileage 360 Magnum(I believe its a 91?)So to swap it in place of a LA 360,what all do I need to change?It,s a complete motor with alternator and pully,s,fuel injection,starter.I would be swapping to carb and I have a 2500 stall with weights on...

My 66 Dart 360/904 has a surge to it.Ran fine til I went to the track.Now it has a surge to it?I swapped carbs thinking it might have sucked something in(ran with no breather)not that.So now I,m wondering if it,s electrical?Could it be the ballist?ECU?regulator going bad?When idleing,it like...

I,m putting the 90 degree oil adapter on my 360 that,s in my 66 Dart.Which oil filters are used(big or small)?I,m running Spitfire headers.Any #,s or advise thanks.I already have a new gasket set(3) for the adapter.

I have a 77 360 complete.What did you do to plug emission holes under ports?Tap and put a plug?or I heard you can plug with JB weld?Or can they be welded closed?Any help is appreaciated as I,m getting ready for exhaust!Thanks

I want to start looking for a 360 for a street/strip project.I need help with which years are best,best heads and also which years to stay away from?Any help would be appreaciated.Thanks.Any complete blocks for sale in the Toronto area?