Search results for query: *

Does anyone know the part number for a 74 Abody V8 fan and clutch?

Can anyone share a part number or a source for the heater line vacuum controlled valve for a '74? Thanks!

Can I use a 3 groove crank pulley now and run the car without the factory AC compressor temporarily? Then put the compressor one day and have the 3 groove crank pulley already on the motor?

Can anyone tell me if a 74 Duster with AC have the same vacuum tube layout as the 73? All I have access to is the 73 Dodge shop manual. Here is a copy of the schematic from the 73 Dodge manual.

Does anyone have experience running this radiator with a mild build 318? Automotive Aftermarket Catalog - MyCarParts Thanks

While my car was in the paint shop one of my defroster hoses disappeared. I'm not with the car right now to measure. Does anyone know what diameter hose is needed for a 74 with AC? Dorman makes them and they can be had at Autozone, Summit and the like. Thanks

Any of you good folks know where I can get a schematic for the AC Vacuum lines? There was no AC controller in the dash when I bought the car, just the vacuum line connector, but it has been cut in a few places. Bought a nice controller from a fellow member and the vacuum line connector fits...

I cleaned up and rebuilt my Heat/AC box. I'm wondering what if anything ( lithium grease, etc )should be put on the seal to the Cowl fresh air inlet or should it go back in the car dry?

I'm doing a 74 Duster project with my son. The car is a factory 318/904 care with AC The car was missing heat ac controls but the heater/AC box was intact. The dash assembly is out of the car. All components are out of the car and the AC coil and heater coil have been pressure tested...

I have a 74 Duster with factory AC. I have removed the AC box and the heater box. The only control cable that was there is a cable that moves a flap in the heater box. My car didnt have heat/ac controls in the dash when I rescued it. My heater core and ac condenser coil hold pressure. There...

I posted this on my resto-mod thread also. We removed the dash assembly from our 74 Duster project, and I am looking for tips and suggestions as to how to remove the Heater and AC boxes from the car. I want them out of the way so I can do the floor pans and wiper pivot seals etc, etc. etc...

I know this may sound stupid.:newb: I have a 74 Duster I am resto-modding. It was a long time ago but back in the day I helped a friend repair a 68 Barracuda and as I remember it that car did not any sort of vacuum paraphernalia to control the heat/defrost function. On my 74 there is a...

Is anyone willing to list the steps required to remove the heater/AC box from a 74 Duster. I need to replace mine Thanks in advance. :burnout: