Search results for query: *

Hi Guys, Just thought I'd share this. My buddy Larry purchased a '64 Barracuda recently. It needed a lotta love but one thing that needed immediate attention was the fact that the temperature and gas gauges were not working. We had already replaced the tank and sending unit as well as the...

After loosening the switch I took out the 2 screws holding the wiring cover on. I didn't remove the cover but the extra play in it made it easier to fish the wiring through. I cut the connector off (it's easier to get the old pins out if you can work with it while standing up). I then taped a...

Do recently I have developed an issue with my turn signals. The rears work fine but the fronts do not. I did do a lot of wiring rerouting to hide a lot of the engine compartment wiring. Must of it was run through the frame rail. The issue is when turning right, the rear signal works but nothing...

Hey Guys, I was considering putting my factory radio back in my dash to make things look a little nicer, however I knew that I would miss my bluetooth capability and quite frankly AM radio doesn't sound very good. So after thinking about it for a while I came up with this. This black box has a...

Hey Guys, Well I'very finally had enough of the intermittent dash light dimmer on my car, so I am going to replace it. The problem is I DON'T TRUST the garbage you buy from places like Advance Auto Parts. After I installed a "BW" starter relay from them a couple of months ago and it didn't...

Hi Guys. First, I just wanted to say that although my background is electronics I have no Idea what the high limit is for alternator output. Here's a little background on what we are working on. My friend has a 1988 318 powered Dodge D150 pickup. One Friday he got into the truck to go to our...

Hey Guy's, Well it finally happened! The rebuilt starter that I put in my car in 1981 is starting to act up. So I decided to order a new mini starter. Summit wanted $159.00 + tax ( went to their show room) but I decided to check Rock Auto Parts to see what they wanted for one. I hope that I...