Search results for query: *

Hi Electric Gurus, I just put an MSD 6AL, MSD distributor, on my 70 Dart. I have an aftermarket internal voltage regulator in my aftermarket Alternator. So I removed the factory under hood wire harness that went into the middle of the firewall bulkhead. I did not need the factory water temp...

I had my Duster running last week. has been starting great. I was working on replacing steering wheel and when I was done it would not start at the key. I could start it at the starter relay and it would run. The first thing I thought was switch. I replaced the wire harness to the switch, than...

I finally got the car out to the end of the street and back. No power at all. 50 p.s.i. oil pressure at idle. almost 14 lb.s vacumn at idle. I am not sure if it is in the timing or carb. any ideas?? I set the timing at 35 total at 2200 r.p.m. It is a direct connection dist. with no advance. It...

I was thinking of posting this on the racers forum, but it looks like they have bigger fish to fry. From a little over stock motor with a larger cam 262/268-475/494 lift. Anyone have suggestions with a stock mopar Performance dist. Years ago I could remember stretching the heavy spring or...

I thought I had all the lights straigtened out. I finally got a pigtail for the parking light, 72 duster Sharktooth. the problem is now the parking lights will not come on with the headlights. With the headlights off, the turn signals work and the 4 way flashers will work in the parking lights...

I keep blowing out the fuse for the interior light/something on the fuse box. This is a 20 amp fuse in a 72 Duster. It will also have a short when I put the negative cable to the battery. Any one have schemetics or ideas as to what all that fuse covers. Thank you for any help.