Search results for query: *

Recently I had my rallye cluster out and I changed the dash lights to LED's. I swapped out the clear 914 bulbs to Zevo amber LED's. I have some before and after pictures taken with the car not running with the parking lights on. See what you think. I might add some led strip lights at some...

I have my dash out trying to get the gauges to function. My performance gauge used to work fine two years ago and last year it started to work very slowly. This year it worked even slower, so now that the dash is out I'm trying to fix it. I removed the nipple and there was some corrosion...

Hey Guys, I'm having a problem with my stock oil pressure gauge on the rallye gauge cluster on my car. This year when I got it out the needle wouldn't rise up past 1/4 on the dial and it was always at 3/4 at idle. I checked it with a mechanical gauge and it's at 75 psi at idle. So yesterday...

Hey everyone! I'm getting fed up with how hard the way my car starts after getting hot. I'm sure everyone has this problem one time or another. I have a restoration group 24 battery in my car now with a mini starter and it will start fine when it's cold. A couple spins and fires right up...

So I'm driving along Thursday about 10 miles from home and the car just dies, no sputtering, just like the key was turned off. On the side of the road I tried replacing the EUC with a known good Mopar orange unit and the ballast resister. Didn't work. Tried wiggling some wires,no go. Checked the...

Can someone educate me on the subject of spark plug wires and the plugs. Right now I sent my distributor to FBO to be recurved for the new cam I installed. While I'm waiting I went and checked all my wires and plugs. I checked my wires with an ohm meter and it showing I have about 6k ohms per...

I was thinking about changing my suppression core 7mm spark plug wires with some solid core wires. I don't care about radio noise but I've read that they can interfere with a ignition module. I have a FBO unit mounted on the left side inner fender well, between the battery and the washer bottle...

I've been having a continuing problem with my ignition. It turns over but no start ever once in a while. I swapped out my FBO box to my Mopar orange and while it hasn't had a no start, it makes my tach needle bounce around at 2500. It works fine from idle to 2500 rpm. With the FBO box it worked...

I've been having starting problems with my car recently. It will start fine most of the time but once in a while it will refuse to start. It turns over but there's no spark. Wait 5 minutes and then it will start. I'm using an FBO ignition that is about 6 years old and have had no problems with...

Hey everyone! I want to replace my stock starter with a mini starter but am confused on which one to get. I had no idea there were so many different ones. I have stock exhaust manifolds but might swap them out for headers in the future. Are the cases different sizes? Looks like they have...

I was wondering if there would be any noticeable gain from switching from my stock 7mm suppression core plug wires to some 8mm performance wires. I'm using a FBO box with the matching coil and looking for a little more performance.

I have a vintage look group 24 battery that I bought years ago and it has gone bad. I looked for a new one and they doubled in price, over $250. I hollowed out my old case and was going to put a smaller battery in it. I found a Odssey dry cell battery that will fit nicely. It's a PC 680. It...

I have a Antique Auto battery that I bought in 2001 and now it's going bad, only puts out 200 cranking amps. Tried to save it by flushing and adding new acid. It didnt work. Question is, has anybody cut the bottom off and fit a smaller battery in the old case? And used cables from the old...

Anyone using the FBO ignition system on their cars. I'm thinking of switching from my orange box and having my dist. phased in by them. How does your's work?