Search results for query: *

Another forum a thread popped up, and a guy over there--who owns a 70 Plymouth, by the way--uses thermal / IR imaging to look for warm spots. Do an internet search, there are various suggestions on this And a few years ago, when I was screwing around with old manual lenses, guys were...

I don't know anything about them. Says "Dolphin", seller is "oldnewparts" Fuel Sender To Gauge Converter Module Ohm Adjust To any Sender To Gauge | eBay

Suddenly occurred to me they might make great brushes to clean the harness connector cavities for the ECU, the VR, and the distributor pickup connector .17 Cal. Rifle Bore Brush

Playing around in the basement today, and about 2 weeks ago I happened across the old "K car" cluster out of my Grampa's wrecked K car which I pulled the engine out of, maybe around 2000 I thought maybe some of the cluster could be used, like for a voltmeter. Now the cluster...

The Scamp, drained the old fuel, changed the two flex hoses in the system, did a "quick" cleanup of the alternator brushes (which I had to remove to access the fuel hose) did compression check, inspected cap and rotor, and resistance checked the plug wires. Remounted the VR Then...

With all the hoorah about ammeters, member Ironracer sent me an external shunt meter out of a 76 A body The face is marked +/- 40A (photos shamelessly stolen off the www) Why? Because if you REALLY want an ammeter, this setup would solve the bulkhead connector...

I've heard Dell City mentioned, who has had good experience with whom here and there for no 4 battery cable?

Well I HAD the key. The one key. And now I don't know. May have dropped it in the snow last winter. Anyhow "I think" I found a guy to repair/ replace the roof damage and now I can't find "the" key. How do I break the column lock, without too much collateral damage? I wasn't a car...

!!HUH!! Old man learned something. Was into the Dodge ram service manual and saw a little drawing about inline splice "clips" A simple little "U" shaped clip that you wrap around the "running" wire along with the "to be added" tap wire, and crimp. Solder........Makes a...

I made a "damn poor" scan of the 74 electrical wiring for A bodies out of a paper manual I have. Anyone host this for our site? RE: this thread 74 Dart 318 Netural Safety Switch?

........"Skip White" and "other" similar import distributors or "ready to run.........." Heard a bunch from many of you using these, but what do they have for a curve, and what is involved recurving them?

In a rambling search, looking for info on Mopar ECM I came across this gem, "worth a read!!!" From this thread http://www.gearhead-efi.com/Fuel-Injection/showthread.php?349-Hacking-tuning-the-jeep-ecm/page3 post no 43 This pdf...

I REALLY don't care for Optima batteries. So if I was to decide to trunk mount the battery, what other SEALED options that do not need to be vented AKA NHRA, are out there? (This may or may not happen, so let's try and keep the cost reasonable, 'K?"

Some great info here. You will probably never see what they are calling the "insulated" field used for 1? year 1970 Volume 70-4 The 1970 Alternator and Regulator - YouTube and the big frame 100 amp unit MTSC - 1975, Volume 75-3 Servicing Chrysler's 100 Amp Alternator &...

The 67 wipers started acting "weird" turned out after a morning's work to be the........................... BULKHEAD CONNECTOR But I have two other motors that I've obtained, at least one is labled a rebuilt. These LOOK like 3 speed / variable speed motors which I...

"Read" on 1970 Volume 70-4 The 1970 Alternator and Regulator - YouTube

Pay 'tention, LOL 1970 Volume 70-11 Windshield Wipers - YouTube

Steve, 4spdragtop ask me about calibrating a tach I'm trying to come up with ideas that the average guy could employ to do so. There's always "find a guy" with a good tach. How do you know? (It's a good tach) Or you could "find a guy" with a tuneup machine, but that...

Here's some info I hope some of you can use, out of the 74 shop manual. CAVEAT: This MAY and probably DOES only apply to the older 5 pin ECU, and not to 4 pin and or third party brands which may be different.

Well I'm a little miffed!!! 'T other day the starter started "slipping". I've never had this problem before in all my years. Last night, got it on the hoist, removed the dust cover, and examined the converter. Could not get the symptoms to show themselves, but the converter/...

I finally dug through the junk box, went down to Radio Shack, and built myself a copy of the Mopar C-3826 guage test tool. It's a little crude, but hey, I'm not going to "show" it. According to what I can find, the three test resistances for senders (in the C-3826 tool) are L...

I was "somewhere else" and came across this tidbit, could be useful if you are swapping a Mopar into a "non Mopar" vehicle. Or just take a little more load off the ign switch and eliminate one wire out of the bulkhead Other brands don't use the Mopar method of ballast resistor bypass...

Anybody know of a rough chart that equates the common Mopar aluminum dist in regards to mechanical advance degrees versus slot length in the weights?