Search results for query: *

Hey guys/gals I picked up a 1974 D100 a few weeks ago, looking for some wiring info. I am replacing all the wires on the engine harness and beefing up the charge wire, along with bypassing the amp gauge. Do anyone have a pinout or diagram of the firewall bulkhead, I’m cleaning and Replacing all...

do they sell smaller pulleys so mu alt will charge at idle

Whats a good Dizzy for a mild built 360 to run with a msd street fire or 6al box.

Ok I have been running the Skip white disturber for a while about 5000 miles and my coil just went bad and left me on the side of the road. The thing is I put a new MSD Blaster 3 coil in when I put the dizzy in so 500 on the coil and the dizzy. When I pulled the cap off the rotor button was 100%...

How would I go about Changing my headlights and wiper to toggle switch's Headlights on a 2 way toggle switch but what about gauge lights Wipers on a 3 way toggle switch.

What are some upgrades I can do as far as headlights on my duster

Ok so I bought one of the skip white hei distributors hooked it on and fired it the engine fires right up but for about a 1 second then dies using the throttle does not change anything what could be causing this.If the spark plug wire were not on right would it cause this.

OK so my headlight have been doing some funny things for a while I finally decided to fix them. When I have the head lights on and drive the car for about 15mins the headlights start flashing on and off but if you turn them on and off the stop flashing for about another 15mins. I thought it was...

Can you install the gear that the dissy go on wrong. Causing the roter to not line up at tdc

Ok so I have been having problems with my fuel guage it was a eques 73-10 fuel guage.Well I finely got a new sending unit for the car and was just testing it and am having a problem. I cut the wire that runs the sending unit to the guage I cut it about half way so it was easier to work...

http://www.performancedistributors.com/dodgesbdui.htm Is it any good

Is the vacuum advance on a /6 distributor the same as the v8 distributor.

Ok so I bought put after market guages in my car Fake auto meter and the fuel guage was 73-10 reading but was allways crap.I found out the hard way that 1/4 a tank is dead empty but now its not reading at all it flickers ever so often tho.I used the muiltimeter and I am getting no reading from...

Will this work on my 71 duster 360 engine swap. http://www.oreillyauto.com/site/c/detail/BTE0/010153X/01468.oap?year=1973&make=Plymouth&model=Duster&vi=1499533&ck=Search_01468_1499533_1276&pt=01468&ppt=C0330

What wire do I ground on a wiper motor to get it to work 2 speed motor 71 motor.

Ok so in the 360 swap I am going from a 73 duster /6 ele ingtion to the 360 points for now(will get MSD setup when I get the funds)What wire will I need to run the points.

Ok while doing the engine swap I am thinking about a new fuse box and wires.There was a fuse box on here with the newer 14 fuse holder but newer style fuses.What is a good 14 or so fure box with all the relays and etc I need for headlights and others. Or what about a engine bay fuse box like...

Wiring harness is there a wiring harness made for the 73 duster. I need the wires that go from the firewall to headlights and from firewall to engine.

Are all the wires that run throught the firewall (bulkhead connecter) are all the wires fusable links.This is a 73 duster.

What all would I need to hook up MSD Ingtion system to a mopar 318 or 360.

This is a 73 /6 Duster swapping to a 318 I need a new box that transfers all the wires from the engine bay to the inside of the car. This is the thing were all the wires are run to plugs and go through the firewall. What is these called and where can I get a new one of these. I also thought...

OK so my uncle brought up a good point.He said that I should get a battery cut off switch,because these old cars are easy to still.JEGS has a cut off switch for 14.99 so I am going to get it.Is there another switch that will keep power to my radio so I don't lose all my settings.

I am pitting a new B&M shifter in my car.Which wires are for the reverse lights.And were can they be found.

Ok so out of the blue my car wont start (/6 225 73 duster).I checked the battery it good checked the cables there good.I read my book on the car and it said to look at the starter relay(thing right next to the battery) and jump the 1 and 4 prong if it starts its not the relay well it started...

Ok so I put all new gauges in my car they are aftermarket equus gauges.I got the fuel gauge that was for mopar 73 empty 10 full and when my gauge shows a little under 1/4 tank I have no gas at all bone dry is it the sending unit.How can I test sending unit (ground it out?)

Ok so I replaced my gas gauge with a new aftermarket gauge I did not replace sending unit.When I am driving the gas hand is jumpy is that normal.MY dad said it was because it is a old car and probly has a flot in the tank is that true.

OK so my turn signal in the grill and on the top of the finder doesn't work the rear dose tho.When you pull on the wires they work for a little bit,So its a connection issue I know that but were do I start.

It is on a 73 duster non rally dash its a blue wire with a white strip its the one beside the fuel sending unit.

What do you guys do for a antenna one you can really see.

Well my /6 has been running hot about 200'F idling.Water pump was not working so I replaced the thermostat now the water pump works I think I can see the water moving but is is moving kinda slow but not super slow.Is that normal I cant find in my manual anything about the speed of the water.The...