Search results for query: *

Anyone else save their old plugs and hit them with the sand blaster and regap and reuse them. Running a big dominator on the street they foul sometimes and I aint gonna buy a new set everytime.Just curious.

Got a vintage Mallory tach i,m putting in my car. Its one of the early 5 inch 10,000 rpm tach with no rev limiter or shift light. It has 5 wires coming out. Red,orange,black,green and white. Red is most likely hot and black is ground. Orange should be lighting but i,m not sure. Found a site that...

Wiring a remote trunk popper and would like to throw some audio cable in while i have everything apart. What gauge power wire for a 600 and a 1200 watt amp?thanks. sorry for the typo on gurus.

Been fighting electrical gremlins on my coronet. Cant get the driver side turn signals to flash. pulled collumn switch and cleaned it.checked slider on driver side and when slid to on it has power to both little contacts in the switch. Both front and rear bulbs come on but stay on constant. The...

I installed a one wire alternator. I ran the feed from alt. to the starter relay. then where I cut the original amp gauge feed I wired a fusible link to the hot relay post to feed the amp gauge wire.I deleted the amp gauge and connected wires solid. Now I wired the switch wire to my msd to the...

My wire between the ign terminal of the switch and the regulator looks like it has been hot. Its brittle and melted. When I run a 4 0r 6 gauge wire to the starter relay since i,m using a one wire alternator can I run a new wire from the switch ign terminal direct to the MSD box? A simple diagram...

bolted the coil and bracket on top of my powder coated intake and it looks like crap. how about some pics of your coil mounts and msd location on rb,s. looking for a clean idea. want to keep the top of motor uncluttered. thanks I know you guys will give me some good ideas. anyone out there with...