Search results for query: *

I have replaced my Alternator and Voltage regulator (AC Delco, the Best one Advance Auto has) When the car is running, the Ammeter is steady sometimes, and other time is pulses, or blinks, on and off. This causes the interior light to flicker at the same rate. I ran a wire direct from the...

I recently had issues with the distributor that actually turned out to be a bad ecu. Got that fixed, car running, but no power at top end, kicks back, stalls, etc at WOT. 340 engine, Comp Magnum 280 cam, headers, Edel performer intake with 625 carter. Supposedly a Clyes timing chain. Mileage...

Ran kinda ok yesterday, but had issues starting it after i got gas. 10 minutes at gas station. Now it will not start at all, no spark. Here is an odd one. I have current all around, everything is wired correctly, etc. Good grounds, fresh wires, fresh coil, new cap and button, new plugs...

Try #2. This corrects error discovered in my first effort (thanks 67Dart273) Note that the advance in the distributor is exaggerated so is is easier to see. 30 degrees timing advance at the crank is only 15 degrees advance at the distributor. The crank turns 2 times for every 1 rotation of...

..

After inspecting my engine last night, while it was idling in the dark, I could see the wires glowing intermittantly, very etherial and other-worldly (whatever that means). Anyhow, I need new wires, and wanted to get some opinions. I read a previous post...

I installed a 408 Stroker in my duster, and am having problems getting it to start. It will crank over fine, and fire occasionally, and I have bee able to get it to start before, but with some conditions: When I got it started, the timing was way retarded, so much so that the mark did not...

I got one of these new on trade, and was wondering if it will work with the stock mopar module, or with the mallory 6AL. The instructions say "must" use a MSD 6 or higher. Thanks!