Search results for query: *

When I restored the dash in my 68 Cuda about 10 yrs. ago I upgraded the light bulbs to the best I could find at that time. Unfortunately even they were a pitiful excuse for dash lighting. The factory bulbs were part # 168 and the only upgrade I could find at that time was bulb #194. These barely...

The interior wiring harness in my 68 Cuda is in real good shape but the puny 6 fuse fuseblock has rusted terminals. I could probably use a wire brush attachment on a dremel and clean it up but I'd like to add at least 4 more fuses so I'd like to just replace it. Checked at NAPA and they had some...

Does anyone know where to get new bulkhead connectors for a 68 cuda? I just need the plastic part as my wiring harness is in excellent shape but when I stripped the engine bay in June to paint it 2 of the bulkhead plugs broke due to being brittle. It's the retaining part of them that broke. They...

Trying to help a buddy repair his wiring harness for his 1990 Dodge Ram and it has a multi fusible link arrangement (5 total all molded into one outlet) and one is burned up. I know a lot about wiring but I don't know why they use fusible links instead of fuses. Can anybody tell me if a fuse...

Does anybody know of a reference to how many degrees advance factory vacuum advances for small blocks had? I need one that will give me 8-9 degrees at the dist. (16-18 at the crank) but don't know what they might have been used on. I checked into the Mopar Perf. vacuum advance can and even...

A year and a half ago I rebuilt the wiring harness on my 68 Cuda and upgraded the charging system to 10 ga. wires and also reconfigured it for using the newer style dual field charging system by adding the extra field wire to the new style regulator. I installed a 60 amp alternator, new...

Ok gents I have a question concerning my 68 Cuda' neutral switch and wiring on the 727 trans. When I bought the car some bonehead had the wiring cut off and it bypassed at the starter relay so it would start in gear. The car has a console which has a switch on it but when I ohmed it out seems to...