Search results for query: *

ok so were getting the 69 M Code Cuda close and install the dome lights and!... they work great! nice and bright with either door open, and when you click the headlight switch over... BUT with the doors shut the bulbs are still on, the filaments is just glowing... so I proceeded to follow...

ok guys so the m code is wanting its dash back but we are hung up on the map light stuff! now we pulled the original harness out and saved it as its in awesome shape, but now we are seeming to be missing ends which I cant explain. going online I found that the map light should have a brown...

so i have an issue that i have never ran into before... sometimes in my 73 swinger SL6, the temp and fuel gauge will just peg for half a second and then come back down to normal reading... i was thinking the voltage limiter could be shorting out(if it has one)... what do you guys think??

ok so today i installed my vacuum gauge and the wideband o2 setup... played around in the drive way for quite awhile so the car was running and charging fine... so out to finally test it and i get about a mile and my volt gauge is dropping fast and AMP gauge is in the middle with no...

so im working on my GF's parents nissan mini truck with a 2.4L... and im trying to get the O2 sensor out... well like everything else on the truck they never have replaced ANYTHING... plugs had no strap left on them lol... any ways i tried the o2 socket but no dice... its a 22mm but it wont...

si ive had this box for awhile... never used it but think im going to... anybody have any specs or wiring dia? dad has it in Cali so i dont remember it completely but pretty sure its different then the + model... below is just so you can see it...

so i was driving home and all of a sudden my lights were flickering and my volt gauge was bouncing, and the alt gauge was flickering around. so i limped it home while watching my gauges thinking my belt was loosening up or something. so i get it home and the hood up and all looks fine. the belt...

so i have a 68 dart that when i got it the left turn signal didn't work but all other lights did. so i converted the p/s dart to manual steering with the correct column and box. i checked the wires from the plugs and they were both the same. so i was driving tonite and noticed that when i hit...