Search results for query: *

My 71 dart has two ballast resistors. One on the wiper motor (2 speed motor) and one on the driver side far corner. The one on the drivers side firewall gets extremely hot. I just installed a new coil (MSD). Ive never noticed this before. would it help to install the 8ohm resistor is the kit...

Does anyone have a picture of the back of a standard (non rallye) dash cluster (what goes where)? I see two large white plastic connectors (multi pin), 1 fuel gauge connector, and one alternator connector (red). Anything I might be missing? I seem to have some extra wires floating around in...

I pulled my cluster out and this (condenser?) is fastened to the side of the speedometer housing with a wire with a spade connector. Where does it connect? sorry picture rotated

Just took my 71 out, first time this year:glasses7: I was having a problem last year with the temp gauge pegging when the lights are on, now same thing with the fuel gauge, both gauges any ideas? Interior is coming out soon so Im going to get under there and have a look. Its a non rally dash.

Guys, I want to swap my stock coil for a MSD Blaster 2 coil. Car currently runs a Mopar orange controller . What ballast resister should I purchase.

Stupid question #50 . I have always run my 273 (mopar electronic conversion kit with eddy 600 carb) using the "timed vacuum" port on the passanger side of the carb. Ive noticed the ignition seems to break up at higher rpm. Should I be using the other port on the carb for manifold vacuum? (driver...

Can someone post a picture of the router the positive battery cable takes on a 70/71 dart with 340 exhaust manifolds? this is a 318 car with TTI exhaust. I am having trouble routing this to a mini starter and clear the exhaust.

Ive been chasing some wiring problems today with my 71 Swinger. I noticed when driving the other night that when I turned the dash lights up, the temp gauge would peg, turn them down the gauge would return to normal. I went out tday to back it out of the garage and the battery is cooked, stone...

In the spring I swapped out my larger style starter for a 1990s mini starter. Worked great, easy to install once I got the old pig out. Now the odd time, when I turn the key, I hear a "click" like it engages but does not turn. I can walk away for 5 minutes come back and it is fine. I've checked...

Hello everyone, I have the dash out of my 65 Dart, replaced the fuel gauge that got toasted by the gauge voltage regulator. Where is the regulator. I thought it was on the back of the cluster. If this does not work I will be installing an Autometer I got from a member. I thought since the dash...

Hey guys, I decided to throw a timing light on my 273 finally months after upgrading the ignition to electronic and ballparking it by ear. The car runs good , starts good but I was curious so I pulled out the tlight. Timing tag is readable on the left side of the water pump, but I can't see a...