Search results for query: *

Does anyone have an exploded diagram of a power steering gearbox for a 73+ a body?

While I had my rear end jacked up and off the ground so I could try and find out if my axles are bent, I noticed that one of the leaves on my p/s leaf spring was not centered with the rest of them. I checked the other side and they weren't exactly straight, but not as severe as the other...

When installing a 73+ pitman arm on a 73+ power steering box, how far up the splines should the arm go? There is about ~1/4" of splines still showing between the top of the pitman arm and the steering box when the pitman arm nut gets tight. I'm just wondering if that is normal to have that...

Anybody happen to know the size of the pins that go in the front of the strut rods? I seemed to have misplaced the ones that came off of my ride! Thanks

I have these brackets that came installed on a Saginaw power steering pump that I bought and I was curious if anybody knew what kind of application they are for? Obviously for a Saginaw pump but are they big block or small block? Specific to certain years? I haven't been able to find any...

72 Dodge Demon Took apart my steering linkage to get it painted and powdercoated and I can't exactly remember the orientation. I was originally using the /6 k member that came with the car and a 73+ steering linkage and gear box. I swapped it out with a 68-72 k member from a 69 dart. I can...

I need to order some strut rod bushings for the front suspension in my car (72 Demon). I had removed everything and had it powdercoated, but I can't remember if there are bushings or anything that go into where the strut rod meets the LCA or not. I know bushings go in the K frame for the...

Got this steering linkage with a v8 k frame. It came off a 67-68-69 Dart I'm pretty sure. The pitman arm and idler arm are longer than on my 72 Demon (power steering). The centerlink is also slightly different. The mounting holes for the tie rods are rotated 90* from the pitman/idler...

How long is a steering coupler for a 72 A body with power steering?

Hey guys, I'm working on rebuilding two steering columns and have a couple questions about them. The first one I'm doing is the original out of my car, 72 Auto P/S Column shift and the second one is a 73 P/S Floor shift column. In my bag of parts for the 73 floor shift column, I have this...

Im in the process of powdercoating my entire front suspension and wanted to get some ideas of what everyone else is doing. I've got the steering linkage done in black and was thinking of throw some silver in there to break things up a little bit. Post some pics if you've got them.

I know that from the factory mopar injected nylon into the steering shafts so that they would collapse on impact. I've read on here and other forums that if the shaft does collapse you can use nylon screws in place of the factory nylon injection. Well this was my plan going into my steering...

Replacing the idler arm on my 72 demon and ordered one from autozone which was just a relabeled moog part. I noticed that it did not come with a new dust boot but it did come with all new hardware so maybe it got left out. Went on Rock Autos website and looked it up and all of their idler arms...