Search results for query: *

Does anyone know the Bilstien shock ID for a 1967 formula S Barracuda?

I'm looking for the small 1967 P/S output shaft nut and washer for my new P/S box. Anybody have a spare?

I'm getting ready to ship my PS box out to be rebuilt, I'd like to get some feed back on what level to go with. This is for a 67 Barracuda convertible with some work on the suspension. I'm using Steer & Gear and thinking about level 2 or 3, probably 3. Will that be too stiff?

I bet that got your attention! I'm rebuilding a set of lower control arms and not sure if the pins are set deep enough. Here are some pictures, what do you think? They are bottomed out on the bushings, I'm not sure they're not deep enough.

I'm replacing the Kframe and lower control arms on my 67. The old Lca's have sway bar tabs and I have a good set of new Lca's that need the tabs. Where can I get a set of factory looking ones???

Can anyone tell me the collapsed length and full extension length of the front shocks on a 67 Barracuda?

I'm using CAP UCL's in my car and think I'll be switching back to the stock UCL's. My question is, I have the offset bushings and it says to install them with the offset to the frame side and the thicker part to the ball joint. Will this give me enough camber and castor adjustment???

I'm rebuilding the lower control arms and I'm at the point of choosing which bushings to use. What are the Pro's and cons of Polyurathane and rubber bushings? This is for a street car that does have a lot of suspension work. It's a 318 soon to be a mild 360 4 spd and we have a ton of hills and...

I'm replacing the lower control arm bushings in my 67 Barracuda Formula S and found the K frame bushings are screwed.. Do they make replacements for them?? They look like they're tack welded and might not be too hard to remove. You can see pic's of the damage.

What are you using for rear shocks?? I'm looking for some ideas for a street car (67 Barracuda). It's a 8 3/4 with hd springs so I need something with more control then stock. I'm looking for the best handling I can afford..

Somewhere I saw a spring that held the steering coupler cap on. I rebuilt mine and can't keep the cap in place. Does anyone know where i can get one?

:-| I've re-built the front suspension on my 67 form s and used a 74 disk brake set-up. It came out beautiful. The car has a little wander as I drive down the road. I want to know if anyone has used the new tubeular adjustable upper control arms, how did they work out???