Search results for query: *

Ok so I got to looking and seeing what I could do as far as installing coilovers on a qa1 kframe. Going in a 73 Duster gonna have a small block, mostly street car. I found some coilovers with a stud mount in one end, and was thinking with a properly braced upper fender well would they work? I...

Ok so I have a 73 Duster I am building and at this point I need to put subframe connectors on and also going to do torque boxes. I have some 1/8 steel that I’m gonna use to make my torque boxes and was planning on doing 1.5x3 homemade connectors. I got to thanking and looking and I have the...

Ok I have a 360 73 duster looking at my kframe options car is a street/strip car I have a factory braced frame now with qa1 uppers and lower control arms. is the qa1 sub frame worth it over my stock one, or are there any other options. I want to stay torsion bar.

Can you make a lowering block yourself.I want to drop the rear end about a inch can I fab up some plates out of 1in thick steel and use them.

I am going to start getting my car done (funny huh). I am going to start from the bottom and work my way up. What do you think about this setup in the rear. I am going to do Limited slip unit in the rear 3.73 gear with 28in tall tire 12.5in wide street slick Dr.diff axles 5x4.5 bolt pattern...

http://www.dartbodies.com/products/A%252dBody-Super-Ride-.html

I am changing the suspension on the duster not looking for a road race but a good street cruiser/strip car Hoskins leaf springs Cal-tracks Home made subframe connecters Fill firm manual steering box PST poly bushing kit PST tublar UCA Box K frame Box LCA Just suspension 1in torsion bars 1 1/4...

How do you remove the upper ball joints from the control arm on a 73 duster do the screw in and out or press in and out.

Ok guys I am planing on putting frame connecters when I do the 4 speed swap.Its has a healthy 360 now but plan on a stroker.I was thinking of a roll cage but dont want to have a full cage in my dd/strip car.I will do the rear seat delete but what about a 4 point cage of something like that to...

How would I got about converting my 73 duster power steering to manual steering.

Ok so I have a 1973 plymouth duster with power steering.I pulled the /6 and put in a 1971 360 in it.I have the pump brackets and pully for the ps off a 71 318 A/C car.The water pump crank and atl line up but the PS does not.What pullys or brackets do I need.

Will it hurt to run a power steering car without ps and with manual steering if I have no pump on it.I will be doing this till I get the right pully.

Were can I find rear shock bolts for a 8 3/4 rearend.

Will a 71 duster colum fit a 73 Duster both power steering. The 71 colum is floor shift the 73 is colum shift.

Ok so I am doing the engine swap in my but and Got some new leafs that are going to raise the rear of my Duster a bit.I have air shocks now and really like them but they ride a little stiff.Could I use a shock thats a little taller then stock like around .75 to a inch taller...

Ok so I bought a 71 Duster parts car will the v8 K frame out of it fit in my 73 Duster a /6 car. Also it is a 318 car so a 318 K frame but I am putting a 360 in my car.

OK so I am going to do a swap to a V8 in my Duster 1973 original /6 car. I know I am going to put a 8.75 in the car so I am going to put rear disc brakes on it.I am also going to put a rear sway bar on it. I have just put a sway bar on the front so I am good with that.I am going to put some...

OK so you can see in the pic that it is kinda puddling up.It is not leaking much but still leaking.About a half dollar size every 6-7 hours. It is a 73 duster /6 power steering You can see were the screwdriver is pointed it is kinda puddling up.

I bought a sway bar from summit it is 1 1/8 solid bar. http://www.summitracing.com/parts/ACO-596/ When I got the bar it said there were holes on the k-Frame for the bracket/bushing but I don't see any neither dose my dad.Can someone post a pic of a sway bar mounted in a 73+ duster of dart.

I know a guy with a 1976 Plymouth valiant 4Dr with front BBp disk brakes will this fit a 1973 /6 duster if so do I need the upper/lower control arms of the disk brake car. Ps: the 76 car is a 4Dr /6

Well we had went for a ride and I noticed my steering wheel/column was lose.So I was tighten up the two bolt under the column the two close to the seat and I snapped both bolts in half.What do I do.

just have finshed a total front end overhaul how to I set the torsin bars and aline so I can drive take to the alinement shop

Airshock of no Airshocks I have been searching on these forms for a long time and did not see a full discussion on these. Air Shock I like them because the only about 70 dollars and it help give you a cool stance I have read that they are bad on handling and the car but I have talked...

Well I am going to get some air shocks for the back of my 73 duster And I wanted to know if when I took the old shocks off will they fit on the front

when I turn right my font right wheel is bending like the top if pointing in toward the motor and the bottom is pointing out what making it do this is is a 1973 duster 2dr with 14in wheels