Search results for query: *

Is this link 73 & up ?

I have these disc brake spindles that I don't know what exactly they are. I was told E & B body are the same. But I have these that are different in overall height and the inner bearing surface and seal surfaces are also different. If anyone can line me out on these I would appreciate it...

Hey guys , I need to ship a column that has shift lever on it. If I drive the 1/4 split pin out to remove it, is that all there is to it or will parts fly out !!!

I have some Spindles that I need an ID on. They are marked as 62-74B & E Body. Can't read any #s on them. And what would it take to install these on an A Body ? Thanks Al

I have 2 sway bars that I think but need verification that they are for A bodies. They measure 44 1/2" eye to eye at the link hole. Am I correct on thinking these are A body bars. @George Jets

Can anyone tell me the difference in the LCAs by year? Like what years are the same and what year is different if they are. And center links too, for that matter! Thanks.

I have a couple different Idler and Pitman arms from an A body. One Idler the smaller one on top in the coming picture has a # on it---KR8 E39 The larger Idler has MC133 E 2044 on it. The larger matching Pitman has 4-233 on it. The guy I got these from told me the larger...

This should be easy. #1 Is this a matched set? Mopar? #2 ? #3 Seal of some sort. Felt like with metal backer.. Screws on with about 5-6 screws

1.03" Torsion Bar - A Body Is this price for the pair ? Any one know ?

I have a pair of standard 67 LCA small U joint , small bolt pattern ,listed for sale. @Rassnasty82 Has paid me for these and before I ship to him I want to make sure they will fit his car. He say's he has a 69 Cuda with large Ball joint UCA, 4 piston calipers, Possibly from a 73 Duster "?"...

Is it necessary to use a V8 center link when installing a V8 in a /6 car ? Thanks for the info.

I have replaced all the bushings and joints with factory rubber style bushing. I have not tightened up the LCA pivot pins in the K frame yet. I have 10 revolutions on the T Bar adjustment bolts. Getting ready to install engine and trans. What's the best procedure to set the ride height...

I have my front end all disassembled and ready to put back together. All parts have been cleaned and painted, have new rubber bushings installed. I have the LCA pin in the hole with nut snug, and UCA bolted in snug as well, with new ball joints. I'm ready to start the rest of the...

Which is the correct way for installing these. left or right pic? Pull them through to the groove? Thanks.

I'm going to change out some upper ball joints . Before I buy a socket online I would like to know if there are 2 different ones for small and large joints. If anyone has one for the small joint and wants to sell it let me know. Thanks Al.

My project car is a 67 cuda, that had drum brakes on front. I have a set of 67 Kelsey Hayes disc brake set up. Both are small bolt pattern. The ball joints , upper and lower look to be the same. When I look the new parts up to order , they list lower B/Js for Drum and diff ones for Disc. I...

I have a K frame I need to figure out what it is, Is there a part # on it somewhere?Under the rust!

These spindles came in the bunch of parts I picked awhile back.Can anyone ID them. The big bolts are to wide for an A body lower ball joint , and the hole is to big for a small upper ball joint. Some sort of aftermarket stuff but WHAT ? They look pretty heavy duty. There is no markings on...