Search results for query: *

I’m going to have 2 pass side springs on both sides; 002 spring. Going to try to hook 600+ lb/ft of torque on a 275/60 drag radial. What shocks for a street/strip car? Go...

Just what the title says. Are they 5/16 diameter?? Thanks!

Let’s hear what torsion bars that y’all are using and in what application. Recommendations for a STREET/strip 69 Dart. Small block, aluminum heads, aluminum radiator, manual steering. With NO sway bar. I’m not looking for a killer auto cross set up, or a .810 diameter drag race set up, but a...

Searched and came up empty, so this the official HELP post... How in the tar nation does one reassemble the steering column collar and hub so the hub is “locked” in position and will not turn? I have put this thing back together as I took it apart...or so I thought. Why do I think my issue...

Once again, HELP!!! I'm redoing the front end on my 69 Dart project and have hit a small snag. Using MOOG Part # ES319R and ES319L inner tie rod ends... The "shoulder" of the tie rod stud, (below the threads) will NOT fit in the hole in the drag link. I see they are tapered holes...and yes...

I failed to note the clocking position of my t-bar adjusters on disassembly... Now that I'm ready to reassemble, where should they be?? Looking at them from the rear it seems at there are only 2 choices to get the bars in: 1:00 o'clock, or if I rotate one flat it would be at 3:00 o'clock...

Didn't get a response to this on the "other" board...maybe it's THAT lame of an issue. I have some tube upper c-arms for my 69 Dart and some conflicting info on which side is which. I always thought the ball joints were to lean backwards, so the TOP of the BJ was towards the rear of the...

Is the A body LCA the same for the early 9" application AND the '73 and up Disc stuff?? Thanks in advance ! ! !

Are the 9" brake and 10" drum brake spindles the same on an A-body?? I say no, but another mopar head insists the are... What say you, FABO?