Search results for query: *

These were put on by the guy who ordered my car, according to the second owner, and I'd like to 'restore' them, and mount them correctly, if possible. Both are missing front snubbers and the 2 U-bolts. Searched the interwebs, unable to find info or a pic of these. Obviously, they bolt up to...

67 Barracuda Formula S. I recently had to replace a tie rod end, bought a Moog: Moog Chassis Parts ES319L Moog Replacement Tie Rod Ends | Summit Racing Now replacing all 4, read multiple opinions on Moog and the majority state they're junk, but I have no idea. Proforged doesn't have any...

Putting up a few pics and questions. I've searched and unfortunately unable to locate good info on bb. Firm Feel website lists reinforcement kits for 62-76: Firmfeel Mopar Suspension and Steering There is 1 picture each for 63-66, 68-72, and 73-76, and all appear to be small block. No mention...

Disassemble my manual steering column, it came apart quite easily. The plan was to rebuild and get a new manual box. Is this shaft junk? Worn where the lower bearing should be, and it appears the collapsible shaft is extended. I did a bunch of research on rebuilding a 67 one year only column...

Looking for the basics of alignment. 67 Barracuda, factory disc, manual steering, front suspension gone thru, I forget the kit and/or parts used, but definitely from fabo advice. I was told my car cannot be aligned because the offset washers aren't offset enough. I'm not buying that, however I...

Car was in a front driver's side accident long ago, and fixed not so well. It looks like someone held a welder in a few places for 5 minutes and called it done. They also put a patch on the front, and welded the k to the frame in one spot. Putting on a suspension kit, and of course, the top...

My leaf spring plates were replaced with one piece plate/traction bars. No brand name on them. I like them, but there were 2 white plastic bumpers on each, front and rear, that have fallen off. Any idea if there are replacement bumpers? Or even the same type of bars available? I have...