Search results for query: *

68 Barracuda. 10" drums on an 8 1/4" rear. New shoes and hardware. E brake disconnected at the adjuster. Brake adjusters threaded as far in as they'll go. The drums are tight on both sides. I can get the drums on but they are tighter than I would ever want them and that is with the hardware...

Just did a drum to KH disc conversion. Went to bleed the brakes and had multiple problems. The proportioning valve I bought from Summit leaked from the top nut so I tightened it down and it improved things but still couldn't get it to stop leaking all the way. It also leaked where the line...

Hey guys I'm reading the Kelsey Hayes disc install tutorial and it just says to run a search on here for an explanation on installing the bearings and all that inside the hub. I've been searching on here but I can't seem to find the information I need on it. Does anyone have a link or set of...

I just received a 73+ conversion in the mail yesterday and I'll be going through it this weekend. I want to get everything ready (including suspension kit) so I can just knock it all out at once on my 67 Barracuda. I was wondering what brands of Calipers and Rotors are any good? I'm not looking...

I put new shoes and bled the brakes on this 67 Valiant before I got it on the road. After driving it for a while, I noticed the pedal is really stiff and only goes down a couple inches. When sitting at a light I was having to wedge my knee up under the column because the pedal was so hard to...