Search results for query: *

I installed the Scarebird Front Disk Brake adapter on my 66 cuda last year, and it is working great. However, because of the forward position of the caliper, I had to remove my Addco sway bar. Does anyone know if the adapter can either be rotated 180 degrees to move the caliper to the rear, or...

I need the Front Parking Brake Cable for a 66 Barracuda, the one that runs from the handle inside the car to the adjuster underneath the drivers seat. My adjusting nut is rusted in place, and I cannot turn it. Where can I source one of these?

I recently upgraded to an aluminum Master Cylinder, hoping to correct the leaking lid problem. Before I had a 2 different Manual Brake master cylinders, and both seeped fluid out of the lid. The aluminum one, with twist on caps, is doing it too!! Something is causing an incredible amount of...

After thinking about it, I have never owned a car that had manual brakes! I recently switched my Duster over from Power brakes, using an old a-body rod with a 73 Duster manual disk/drum master cylinder from Advance Auto parts. I have the stock 73 Duster disks up front, and b-body 11 x 2 inch...

I have a 73 Duster, front disk rear drum, that I bought with a line lock installed on the front discs just under the Master Cylinder. When I first got the car, the line lock was disconnected, so of course I remedied that immeditatly. Now, if I press the brakes (hard), and engage the line...

I'm wantin to install an Adjustable Proportioning Valve for my rear brakes on the 340 Duster (disc/drum stock). Any reccomendations? Is the Jegs unit any good? Any install tips? Thanks!

Would like to switch from a Power brake setup to a manual with a modern master cylinder from "Richard Ehrenberg" off of MoParts, along with the larger rear cyclinder. He said i need a pushrod from a manual brake setup, or get the adjustable one. Of ocursem the adjustable is $43+ship from...