Search results for query: *

So after figuring out that most all the boosters have the same "spread" I am looking at a GM dual 7" booster with correct aluminum master. Now where I get stuck is the bore. Currently running stock LBP 73+ discs and 10" drums. MY plan shortly is to go to the B Body 11.75 rotors with Wilwood...

hey guys im in need or a new master cylinder and booster for my 73 swinger (disc/drum) going to disc disc in the near future. You guys have a part number for the booster and master? nobody seems to be able to get it anymore

Ok so im building this lancer front end and i got a set of Big ball joint spindles and upper's. Bummer is i dont know if these spindles are 73+ A body or B body. They do not have the disc brake mounts. Can get pics if needed. Need to know so i can order the correct wilwood kit

im looking to do the 11.75 brake upgrade and use the mancini brackets for wilwood calipers. couple q's... what year did the b bodies start using the 11.75 discs did all b bodies use them in those years can i use my 73 disc a body spindles and those rotors? lastly are the b body spindles a...

ok guys im at a loss! i broke my booster check valve trying to get it out, luckly its was dead. so now im trying to find a new one which is proving to be a challenge! my old one is the 3/4". all the new ones are i think 1/2". if you look at autozone or any of those the "help" kit has the...

hey guys... "stop the Beast" has his 66 dart in here and has us upgrade to the KH 4 piston disc brakes... all is good... but he cant find the Grease/Dust caps that "seal" the end of the hub... looks like the are about 1 3/4"... anybody have a supplier or know a part number? thx Ed

can i reuse the parking brake cable from a 7.25 w/9" brakes to my 8.75 with 11's? if not does anybody have a set of used cable that will work for really cheap? trying to make MATS with project complete... thx ed

i bought a set of backing plates, they are 11x2's for my dart (SL6)... i was looking to get everything thru rockauto but there descriptions are kinda hard to follow w/ nothing about a 11x2 parts... any help would be great... thx P.S. need everything... have backing plates only...

my front rubber hoses are done and the fittings are stripped... so i was gonna bend up my own hard line(the engine is out) and replace the rubber lines with braided. what size tubing do i need and braided lines to fit 10" drums

i am looking to convert my 68 dart to discs, don't care rite now if there single or what. i just have the 9" drums. so that means i need new spindles. if i can get a kit cheap enough i would do that. its just im just out of Tech school and i got noooo money... the car is my daily and its getting...