Search results for query: *

I am planning on replacing the front brake hoses on my 71 Duster with a 73 disc brake conversion kit with steel braided hoses. Would anyone happen to know what size fittings are on the ends? The ones I am looking at are Russell and I think the correct ones would be with a 10mm banjo fitting but...

I have a 71 Duster that has been converted to73 disc brakes and was wondering if anyone knew of a brake hose that was longer than the 73. Problem is (and I don't know if it's a problem when the vehicle is on the ground) when I have it jacked up, wheels off, the hose is maxed out when the wheel...

I have a 71 Duster that I'm having trouble getting a firm pedal on. Most everything is new (calipers, wheel cylinders, master, hoses, distribution block) and with a pressure bleeder, I am able to get a steady stream of fluid at all wheels. I bled the master before hand, but the pedal is still...

Easy question...what's the id of a wheel cylinder for rear 10" drums? I'm planning a rebuild and want to know what size hone to buy. I think they're 15/16" but I'm not sure. Thanks.

I have a 71 Duster that has been converted to 73 front disc brakes. My question is should a proportioning valve be installed to get proper brake pressures to the front and rear? From the looks of it, the previous owner never did. All I found was the brake light warning switch that illuminates...

I have a 71 Duster that has a soft pedal that I can't seem to fix. When I purchased it, it had been converted to 73 disc brakes. I have, since then, replaced the front calipers, rear wheel cylinders, front brake hoses, and master cylinder. I bench bled the master and pressure bled the entire...

I have a 71 Duster with manual brakes that has been converted to front disc brakes from a 73 Duster. I am in the process of replacing the master cylinder and noticed on the old one the pedal pushrod is connected to the master, but on the new one it is not. I ordered a master for a 73 Duster with...

If converting 71 Duster front drum brakes to 73 disc, does the master cylinder need to be swapped too? Thanks.

Will 11 rear drums on a 71 Duster cause problems with the parking brake cable? When I adjust the equalizer, the left rear cable applies about 3/4 of an inch before the right rear. Thanks for any help.

I have a 71 Duster 225 slant six with a 73-76 front disc brake disc conversion and the rear has been converted to the large bolt pattern. I was under the impression that the rear drums would either be 9 or 10 inch, but upon inspection it turns out they are 11 x 2 1/2. My question is what vehicle...

I have a 71 Duster that has been converted to front disc brakes (5x4.5 bolt circle) and was told that it was from a 73 Duster. How can I verify this and what parts would have been changed out for the conversion (steering knuckle, control arms, brake hoses, etc)? Thanks.