Search results for query: *

So the story is I did a 5.7 Hemi swap in my 67 Dart and originally used my 833. I cut around 5/8" off the tip to work with the Hemi as the crank on it wasn't drilled out to accept the full length of the input shaft and ran a register style bearing. I've since swapped to a 6 speed and am...

For all T56 swap owners out there, how many of you have a true Viper trans in their car (not just a Viper spec trans)? What did you do about a connector for the speed sensor? I have a true Viper T56 (from a 2000 year car), and Dodge used a hall style 3 wire sensor for the VSS as opposed to the...

Wondering if anyone out there has installed one of these kits and had pictures. I'd really like to see some pictures of the master cylinder install and their little fancy bracket. Does it use the stock pickup point on the pedal for the rod? Also, do you happen to know the bore and stroke of...

So I know this question has sort of been asked hundred of times, but I was hoping for maybe a little more detail. I'm looking into swapping out my T handle for a pistol grip for fun, but have a bit of a debate as to which handle I might like best in my car. From what I have found, the B body...

So I have a question for the manaul transmission gurus out there. My car has an aluminum overdrive bellhousing, but a regular 23 spline non O/D transmission. I have been running the car with the smaller input bearing retainer for the time being because I figured the 4 bolts would align it well...

So I just finished swapping a 5.7 into my Dart and I kept the old 833 that was sitting behind the old 318. I shortened the input shaft for the register style pilot bushing by around 5/8 of an inch as suggested and measured by me, but now when I drive around I get a while in all gears, not just...

So I just rebuilt my 833 in my Dart and was hoping I would finally rid myself of the puddle under my car from all the old seals, but I just ran into an interesting issue. I looked under the car the other day and saw a decent sized puddle and a drip running down to the bottom of the case. It...

So I got a rebuild kit for my transmission and after taking it all out and apart I decided to check the pilot bushing too since the car has been making a nasty grinding noise when the clutch pedal is down and the car isn't moving. With everything removed (i.e. clutch, pressure plate, etc.) how...

So this may be a little mix of 4 speed and / or rear end, but when I'm cruising along and drop the car into 4th it starts getting a little noisy. It only started after I put my new rear end in it, and while it sounds a lot like a rear end howl it only seems to do it in 4th. I can wind it a...

Anyone ever put a Zoom brand clutch in their car? I need a new clutch in my 67 318 and want something with some good holding power for engine upgrades hopefully soon to come. I'm hoping for around 400-450 horse, though right now I'm pretty much stock. I've seen that the Centerforce Dual...

I recently bought a 67 Dart that had been sitting around for about a year and when I started driving it around my dad and I noticed there was a pretty nasty grinding noise and pedal vibration when the clutch was pressed down. We decided it was the throwout bearing and I replaced it probably...