Search results for query: *

  1. Wrencher

    Annoying Speedometer Noise at Cluster

    Greetings. I started my '66 the other day to shake the cob webs out, and give it a bath which it sorely needed. I drove it around to get the fluid temps up to normal operating temp and I was reminded of an annoying speedometer noise this car has of which I am not sure how to fix. Last...
  2. Wrencher

    Alternator Upgrade Checklist.

    Hey guys, Recently I have taken on my 66 Dart /6 head on with the wiring changes that these cars require after many years in service. This included; Ammeter bypass - I used the MAD method, which wires the ammeter wires (and the welded splice) in parallel, making the starter solenoid the...
  3. Wrencher

    brake booster

    i have seen a few people in the past who have pulled a random pull a part booster from a 90 something sebring (for arguments sake) and using it on the early a. My question is; If i do this, what early a parts am i going to need for the install? Inside brackets? Pushrod? Is there a...
  4. Wrencher

    Fuel gauge

    Is it safe to rule out a bad cluster voltage regulator if the temperature gauge is working? Im pretty sure I can call it a bad sending unit, just felt i would double check.
  5. Wrencher

    Which leaf spring?

    Hi guys, I recently bought a set of wheels and tires for my '66 Dart. I went from 13" to 15". 225/60's on the rear are scrubbing ever so slightly, as the rear end seems to sag a bit. The wheel lip sits right around the top part of the wheel. I see a few different options, and was wondering...
  6. Wrencher

    My Dart Gets it's Wings Back

    Well, my dart has been sitting for quite some time, 12-13 years in fact since my grandfather died and gave it to me. It's been a combination of lack of interest and work that was the biggest reasons. Just recently, thanks in no small part to this forum, and the info that is here, i decided to...
  7. Wrencher

    Need a couple Wheel/tire combo's answered

    Hi, About to order a set of wheels, and was wondering what kind of backspacing i should be looking to get. Wheels will be Crager S/S. 15x7 is about the widest a fully stock dart gt can handle, right? http://www.summitracing.com/parts/CRR-61754/ is what im looking at. I think it will be...
  8. Wrencher

    66 Dart master cylinder replacement

    OK, so I have a 66 dart with a slant six thats in surprisingly good condition, but I find myself shying away from driving it because of the antiquated braking system. It has four wheel drum brakes, which doesn't bother me, but the master cylinder is a single reservoir type, and that bothers me...
Back
Top