Search results for query: *

Hi, I was wondering if someone here might have a hood emblem that I could get the measurements of so that I can work on making a replacement for someone that is asking? I don't need to have it, just some measurements. I believe that the 170, 270, and GT all fit in the same metal housing.

Hi all, is there anyone that has a original package tray for a 64 2-door HT Dart that can post a picture of it and measure it, and let me know the dimensions, please?

I was looking on Ebay the other day for any publications for my car and came across this for $11.99 plus shipping.

Hi everyone, does anybody know if a secondary FSM for 1964 Dart with V8 was published?

Hi everybody, I was just wondering if anybody had a JPG or SVG file picture of the 64 Dart GT emblem to share with me, so that I can make a stencil to use for powdercoating a Yeti type tumbler and insulated coffee mug?

Hey everybody, I am looking to find what is an original style windshield washer tank for a 64 Dodge Dart GT with electric pump. If anyone has a picture of one, I would appreciate it if you could post it here so that I might be able to find one for my car. Thanks, Clay

Hi everybody, Hey while at a car show last week, I saw a 1964 Dodge 440 with a hemi in it. What struck me as very peculiar was that it had offset motor mounts to get clearance for that great big hemi engine in the engine bay. My question now is: why can't we get some kind of offset mounts for...

I really just started to notice that when I go to car shows, early A-bodies don't really get any respect! The people walking around stop and say, "nice paint" or "I like the wheels", but it isn't until I open the hood that I might get a "whoa" or similar comment. With the general lack of early A...

Where can I find a PCV valve that fits into the cap on my drivers side valve cover?

Hi everybody, I have a 64 Dart GT with a pushbutton trans. has anyone on here replaced just the buttons on the shifter setup?

Hi everyone, I just tried to roll down my drivers side window and the rubber weatherstripping must have unglued itself somehow over the winter. I need to get new rubber for these and I am not sure if I need flocked or unflocked for this. Also any ideas on where to get these would be greatly...

I just finished making some center chrome rings for my tail lights on my 3D printer. I found some spray paint that looks very similar to real chrome, and tried it out yesterday. They came out pretty good!

Is there any issues with installing headers in a right hand drive early A body?

Is there anyone else that got so fed up looking for hard to find parts so they got a 3d printer to try and make some?

Hi everyone, I am asking this question again, since I didn't get any responses the last time. Can anybody point me in the right direction to find these parts? They are small weatherstripping pieces that go in between the headlight bezel and the hood. They are about 7-8 inches in length and have...

Getting my dashboard done today!

Hi, has anybody ever tried to put a 65 hood on a 64 dart and been successful in lining everything up? They look like it could be done, and then you have a better palette for hood scoops.

Hi guys, does anybody know what the seal between the headlight bezel and hood is called and where on this planet that I could possibly buy new ones?

Hi, has anybody ever tried to modify the radiator support, or cut it out to install a motor in an early A body and then reconnected it with either welds or bolts?

Does anybody know where I can get molding clips for the body side moldings for my 64 Dart GT? I have an old catalogue from 2003 that lists them, but looking up the company online shows them as being discontinued. The catalogue that I have is Restoration Specialties & Supply.

I got a call today from the driver of the truck that is delivering my newly purchased 64 Dart GT. He told me that he was going to bring the car here either today at some point or tomorrow morning around 9:00! I can't wait, I will be bringing this car to the body/paint shop before this weekend to...

Hi, everyone. Does anybody know what I can use, and where can I get it, for my exhaust pipe? I have dual exhaust in the car now, but I just recently put in a re-built 1965 273 in my 64 GT. The dual exhaust is cut off right below the middle of the seats, and I would like to use it again. Being as...

Hi, does anybody know where I can get a repair manual for a 1964 dart that has the 273 in it?

Well I pulled my slant this morning! Finally getting on with my project. Tomorrow I will pull the old center link and replace with the dropped link. Boy, that slant is tall! I had to get it halfway up and turn it sideways and drop it back down to get a better grip on it because my lift would not...

Hi everyone, I was just sitting here wondering if anybody has installed a v-6 in an early a-body? And I was also wondering if anyone has tried to fit a A-833 to a v-6? From what I was just reading, the first Mopar v-6 was just a cut down 318, and I was wondering if they kept the same bolt...

Can anybody tell me what that little bushing on the hinge spring is called and where I can find 2 of them?

last night I finished my pushbutton to 3-speed manual swap and took her out to the car show today!!! I don't know what people will think of me but I sure did do a nice job switching it over, even if I do say so myself! I guess you could say that I am proud of my work, but I don't even call it...

Does anybody know if I can use any year a-body floor hump for my 3-speed on the floor conversion from a pushbutton? The shifter is an aftermarket retro-fit shifter (Roger Fenton 300) that mounts to the side of the transmission tunnel, not the transmission. The tranny does not have any mounts for...

I just recently purchased a parts car (4-door 270) that is a 3 on the tree, and I started dismantling the car to use the transmission and bellhousing and clutch linkage, to put into my pushbutton GT. But after I brought all the parts home to clean them up, I was looking at the clutch linkage...