Search results for query: *

This is how I tightened my two post mirror head. After pushing in on the glass I removed the locking ring and then removed the glass and spring. I then used a pair on my welding vice grips as shown in the pics to compress the black plate on either side of the ball. Worked like a charm. I didn’t...

I have searched this topic but couldn’t find a post on how I wanted to do a shoulder belt install so here is how I addressed the shoulder belt issue in my early A body (Barracuda). I wanted to do the early 3 point system that I once had in my 68 Barracuda. The belts are PG Classics reproduction...

Finally done. Built in the yard and the driveway. That would be rattle can paint.

Can someone please tell me if there’s a difference between the driver side and passenger side door glass? When I put a straight edge on the glass there seems to be an ever so slight crown but it’s hard to tell for sure. The window edge chrome seems to have a curvature as well but almost more...

Thought this might be helpful. I have a donut from a late model Crown Vic as a spare for my 1965 Barracuda. I chose this doughnut because of the 4 1/2 bolt pattern and that it does not protrude past the trunk floor.I needed a hold down to secure it and didn’t want to spend the money or wait for...

So I bought a kit to repair my coupler on the end of the steering shaft. When I took apart my existing coupler the seal was shot as was the seal cover. The inside was hard rusty greese but when I cleaned up the end, everything seems fine. I don't see any wear on the two blocks on the end.Do...

Are the 64-65 Barracuda headlight retainer rings shared with any other years or models? I need two and I see 67-69's readily available.

I removed the lenses from a 64/65 Valiant/Barracuda tail light assembly and noticed a translucent amber coating on the tail/brake light bucket but not the reverse light bucket. It was bubbling and flaking but it covered the entire bucket area. It was not present on the other tail light assembly...

I'm putting my gauge cluster back together after being apart for yrs and I must have removed the tape from behind the rectangular opening at the 75 mph mark. Am I correct that this opening is the high beam indicator and what color is it when its on high beams? The tape over the opening was red...

Should my drivers door have this recess for the side veiw mirror or is this the result of the mirror being struck.

hope someone can provide some insight into putting a full radius wheel arch on a 64 cuda. i want to duplicate the wheel openings on the original 65 hurst hemi under glass (not the 66 everone knows). they basically mimic the front wheel opening. i have seen several cars like this on the internet...

Forgot to put exaust manifold in place before putting head on...now can't get manifold on. If I remove the head, won't this ruin the gasket. That's why i wanted to pull the column but can't fiqure out how. It' a 64 cuda with manual steering and I removed a clamp at the end of the shaft. This...

Two questions, anyone find a late model space saver spare that works with the 4.5 lug space and is there an interior trim piece that goes at the base of the rear window on a 64 barracuda. If there is, can someone post a pic of what it looks like. On the spare, I would like something that will...

I would like the early drag look without the straight axle. Saw an article from '64 on the very first hemi under glass and they mentioned that the front torsion bars were raised. Has anyone any experience with this method,how much height you can go, problems ect. I don't need to go as high as a...