Search results for query: *

What does everyone think the best temp is ---for the best ET.:burnout:

I will be installing a new american eagle radiator soon and this will let me re-install my clutch fan again. It ran to hot for the steel water pump in my barracuda. *1967 318* The car ran 14.24 at the track last week. I figure, with the clutch fan installed, i should see 14.10 or so in ET. The...

If you run a 318 at the track ,what is your current setup and ET. Thanks ...8)

If you have any experience with proform carbs please let me know what you think of the performance and quality. Thanks.

I bought the new victor 383 intake for my 400 that i started building and was wondering if you liked it's performance. Thank you for responding.:thumblef:

I am getting a new 400 big block and have two options. Run the stock pistons and cut the head for compression OR put a better piston in the engine. The more i think about it, i will most likely put a better piston and cam in the engine. But i am wondering if anybody here has built a 400 and...

Do you run a 400 with a stock piston??? If you do,let me know what cam you run and what your set up is. What are your et's for your car?? I am getting a freshly rebuild 400 (stock) big block and i might replace the cam and cut the heads for some compression. Thanks for any information.8)

I was thinking of using my 273 valve gear on my 360. The car is a street\bracket car and raced all the time. Does anybody use the stock 273 valve gear on the engine they run at the track, or even a street car that's run hard. If you run this valve gear with a performance cam, let me know what...

Has anyone ever used a fuel additive in a engine ,while on the dyno. What was it and what where your results?????

I went to the track and ran my 318 barracuda. Gave it half pedal out of the hole and then rolled into it. Result was a 14.38 @ 94.37 mph. Being more aggressive with the pedal at the starting line did not work to well as you can see. Car went 15.82 \ 15.39 \15.18 smoking the tires (The car has a...

I was wondering if anybody has gone from a standard double pumper to a holley hp carb and what it was worth in ET. Was it really worth the money??? What size carb did you buy and for what motor???? Thanks 8)