Search results for query: *

(guess torsion bar is the correct term here). Is for a SS Nostalgia Racer. My concern is to get a proper set, or is a "worn out" set ok or even an advantage like with front shock absorbers? I mean I guess there are some difference in a new and an old set of bars tension wise? Or can all this be...

What would be the running approx. time in minutes for an engine with a set these sold heads? Lets say a mild with todays standard, SS Cross Ram Hemi (12,5 comp)… Thank you for taking the time.

I could post this on other forum, but since stress on this plate will be quite a bit more than on a daily cruiser, here we go... I tend to over kill sometime when making parts and stuff. I this case though this plate must not flex one bit. I thinking a 1/4" plate here. Not planning any...

Hi, Looking for a gear drive for my nostalgia SS Hemi. Anything to look out for? Pros and cons? I don´t mind using old stuff here, if I can find one, since they are very durable from what I understand. Picture is of an old Ramcharger unit from the sixties. Looks like you need a different type of...

Well, what ever it takes as long as you got it secured to the heads... no, always interesting to hear how you do things... I was thinking of only two being studs in two of the corners, but not sure what´s best here. Don´t think there is a special set of screws and studs for this Cross Ram? May...

Hi, I´m not so sure anymore these 060 old type High Top Pistons was a good find... Are the Dyke Ring Set still available? If not, can I use an ordinary race type ring set? Yes, I could always ask a firm who deals with Piston Rings, if they know about the Dyke Rings :) but what do you guys say?

Hi, Picture is of an Old Cross Ram intake port. Reason I ask is Stage V offers a special order smaller stock dimension intake port openings. So what size is a Street Hemi Head intake port? Or of cause this Stage V Head Stock intake port? Yes I could always call them, but... Thank you if taking...

Would 3" clearance be enough for a set of 10,5 X 29,5 on 15 X 6 wheels with 5" BS? Maybe 1.5" clearance is enough, incase I decide to shorten rear axel some? Picture is somewhat miss leading, since this wheel has 4,5" BS and I´m also going to use break drums without fins... Your experience and...

Hi, Looking for a good price worthy dependable damper for my 1968 SS/B Nostalgia Racing Application. Doesn´t need to be the latest super trick stuff, but good enough to handle at least 7500 rpm. I ask, because as usual, there may be some expensive not so good stuff on the market, but also some...

Hi, Yes sorry, quality of picture is not good, but is showing a heat shield in a SS Hemi Engine. Did someone fabricate them, or did racer make his own? When did racers start using them? Any thoughts and experience on the subject is appreciated. Happy Holidays Stefan

Hi, I´m setting up a SS/B Barracuda, (1968-69) and want to do it as period correct as possible. Racer will only see Nostalgia and Exhibition Racing... The NOS Imperial rear shocks I have, is very hard to pull out, compared to how easy they compress. Will they may be soften up some, when being...

Hi, I´m building a `68 SS/B Barracuda for Show and Nostalgia Racing First I was gonna use the older type of distributor, but since the splitter didn´t fit, I have to use a slightly newer aluminum house one. As for the Ignition Control Unit, I suppose the 534 Chrome Box is the one to chose with...

Hi, I´m going to use these lifters with a Roller Crane 290 in my Nostalgia Race Hemi Build. Not installed yet, but my concern is the bar tend to stick. I was thinking of smoothen edges of, or is this not gonna be a problem when assembled, lubricated and pressure from valve springs are applied...

Application is early seventies Nostalgia SS Race Hemi. I know of the extra .001" that was recommended for the roller tappets to help at higher rpm, but want to know the total tappet to tappet bore clearance. Tappet bores are bushed... Thank You, Stefan

Hi, I´m building a SS/B Barracuda for Nostalgia and Exhibition Racing. When I start seeking for a Pinion Snubber, I notice quite a few guys recommend not to use this device with SS Springs. Car is set up like it would have been done back in the sixties. Race Hemi, 4-speed, Dana 60 with 4.88...

Hi, I have a 426 Hemi short block. And as I started to dissemble it, it turned out it has a 426 1964 Max Wedge Crank #2463548. Question is... Is the Max Wedge Crank equal in strength, to the Hemi crank, that came with the engine in 1966? Thank You Stefan