Search results for query: *

My brother went a new best 10.90 @ 124 in his basically stock N/A 6.4 2020 Challenger. It weighs 4150 with him in it. It's stock except it has a smaller crank pulley, a lithium battery, bigger injectors and a tune for E85. Wallace calculator says that it takes 636 hp to go 124 in the 1/4 at...

For the racers using Alcohol to fuel your race car, especially with a carb. My AMX is crackling and popping a little bit while making a pass. It doesn't appear to be effecting the et of the car. But you can defiantly hear it. Most of my alcohol is stored in the metal drum and sealed. It's also...

I see on these big braket race fliers that a device that reads the tree is not allowed. I understand why that would be. But do you think their is actually such a device being used? I guess if it's on there that someone has tried to use one

I don't Footbrake race much anymore. But for those who do.

For those of you who have not seen a close up of a Bloomer head I am going to post a couple of pictures and the headers that Laverne Ferrouillat made for me and the inside of my intake it is nothing special it is not even ported.

I used to buy .030 thick intake gaskets from Mancini , but I don't see them any more. Anybody know of a source to purchase .030 thick LA head intake gaskets?

Several people have asked me to post some pictures of the Dakota. I am hoping that we have it ready to race by late January or early February. Changes that I anticipate making. I want to change the hood and the front windshield I am going to try to put a regular Dakota RT hood on the truck or...

My son did this intake for the W5 engine with EFI.

If all goes well we're going to Steele, Al to test and tune in the 1/4 mile tomorrow afternoon and early evening. The AMX has went a best of 1.240 at sixty', 5.842 at 660' @ 116.4 mph. The car will weigh 2870 with the driver tomorrow night. The person that guesses the closest to the actual ET...

Anybody coming to this? We're going to try to make it. Going to Holiday Beach Raceway tonight to work on a 6.0 tune. Going to try to slow it down with short shifting both shifts.

9secRR got me to thinking. What is a good 60 foot time for a car that weighs 2630 without the driver? The AMX has been a best of 1.245 with a 240lb driver and a best of 1.258 with a whale like me. Is 1.245 a good 60 at a total weight of 2870?

I'm getting ready to buy the injectors for my Dakota race truck. Is it worth paying extra to get a set of flow matched injectors? It's an extra $220.00 . I'm looking at the Holley 522-168FM injectors

I am pretty proud of the AMX. The 421 cubic inch small block Mopar in the AMX is nothing special. It has Bloomer heads, Bloomer 4.125 crackshaft, Bloomer 6.250 rods, Crower off-the-shelf 31409 cam shaft, Unported Is Super Victor intake, The cheaper Hughes rocker arms, Flat top pistons with 11.2...

If not for then we’d not have much to work on! Lol

Looks like we're going to be able to get out and race this weekend for the second time Thursday night test to get a 6.0 tune up in the AMX and then we are going to race 6.0 Friday night and Saturday along with the bracket race Friday and Saturday.I hope they'll be lots of alcohol burned and lots...

I am currently towing my 36 foot enclosed trailer loaded to go to the races with a 100% original equipment Ram 3500 single rear wheel Cummings automatic transmission. I am looking at trading for a Ram 2500 2017 model it has a Cummings single rear wheels and automatic transmission. The newer...

Two years ago we went from a TF727 with a Turbo Action trans brake to a Keith Long built TF904 with a Griner brake. We did this because it's easier to remove and replace the 904 compared to the 727. We also needed to pick up some ET. The swap accomplished both of those things. We got another...

We got the AMX out for the first time this season. New tires new battery new carb Installed a vacuum pump. New all time best 5.80 at a 116.5 miles per hour. I will never as long as I live by another carb other than an APD that thing was dead on right out of the box. I have always been a Pro...

Got the new to me Dakota home yesterday.

Kent Ritter had a really good deal on some W7'S so I got them for a future project. My son is wanting to build a Turbo Charged W7 engine. For the small block class down here.

My friend Laverne Ferrouillat won the SBN02 class in his 71' Duster. But He was running N/A. 420" W9 engine. The Chevy and the Ford guys are upset. This is the second time that he's beat them running N/A. Samantha Ferrouillat

On my new build I am thinking about using a grid system for the Ignition and using a coil near Spark plug system. What are you guys using in the rear of your block for a camshaft position sensor. Innovators West makes a harmonic balancer with magnets in it can I use this to trigger the crank...

W5 heads are getting closer to being finished. Pictures show the difference in weight of the stock valves vs the ones that we are using. The stock locks vs ti vs the shorties we are using. Chamber volume. Pics of the ports. No flow numbers yet and we might not get any. The time slips will be...

I'm not good at searching the internet. Anyone who can identify this cam? I purchased a engine that it was in.

Mr PRH and Mr Pittsburghracer, have y'all ever tried your best J heads on a large bore block? Like 4.185" to 4.220" ? What kind of HP do you think those heads could support on a properly prepared short block?

I'm getting older and lazy. I'm getting tired of checking all my tires on my truck and trailer each week. I'm going to put a aftermarket TPMS on my truck and trailer. Of those that have done this. First, how do you like it? Second, what brand did you use? Third, Have you had any problems related...

On my AMX I use a B&M pro ratchet with a shiftnoid electric assist I've always liked the Turbo Action shifter, but for a 3 speed I can only find C02 shift systems. Has anyone seen a all electric shift mechanism for the Turbo Action 3 speed shifter?

Does any of my buddies on the have a desk top dyno ? I used to have the app years ago. You could plug in perimeters for and engine and it'd give you an approximate hp and torque figures. If someone does have this software I'd pay you for plugging the specs of an engine I'm going to build for my...

Has anyone done a SBM with a 3.79" stroke and 6.50" long rods? If so how did you like it?

I'm getting ready to start building a two door 1968 Valiant braket car. I'm trying to find two fiberglass doors. Several companies list them. But they are actually Duster doors. The Valiant is a post car and has a frame in circling the window. Is that what everyone is using? I guess just make...