Search results for query: *

anyone know the part numbers to the Cloyes double roller timing chain, cam and crank sprocket?thanks in advance

I have a 67 slant six 4bbl (edelbrock avs 1801) runs good and idles ok , and I say ok because once in a while it does this little hiccup when I’m at a red light or stop sign but as soon as I hit the gas it goes away and runs good and strong . Also when I’m going at a good speed 35mph and up and...

i have a 225 with Clifford 4 bbl intake on. That intake has an open plenum. On that intake I have an aluminum adapter that is a 4 hole pattern. On top I’m running an edelbrock 1801 avs thunder series .im trying to stop that heat soak and wanted to know if anyone knows what edelbrock heat...

have aluminum super six intake but has a hairline crack where the heat pocket is . Would that effect it in anyway?

i have a 67 valiant previous owner did work to the motor had put in a Clifford 268 cam. It has a Clifford intake with Clifford headers and a Holley 390 on top. My question is what should my valve lash settings be? Thanks in advance

Have a 225 the motor was supposedly rebuilt and now is a 235 c.i. . How do I calculate how much they bored out?thanks in advance !

Hey slant nation I got some concerns on my slant and wanted to see if u guys have any input or can lead me in the right direction. I have.' 66 170 with a Holley 1920 .its an original carb I have rebuilt it about 3 months ago and set the float to the best of my knowledge which is half way to the...

i have a 170 slant 6 . for some wierd reason when the car is idling the oil light stays on but once i accelerate the oil light turns off.and as im idling the car begins to shakes as if its going to turn off.my oil level is fine and the oil is clean i have a fresh oil pan gasket also... can...

can someone help me ?i wanna know if a 66 170 slant six is compatible to a 72 904 transmission wich had a 225 slant...as far as the flywheel to the torque converter

i got a 170 slant 6 in my 66 valiant. and have an exhaust manifold from a 73 duster. i just wanna make sure it will work fine with the 170 before i start the swap. and what gaskets are the best for this job. i seen a gasket kit for 25 bux. has all the gaskets i need, the brand is felpro. any...

alright so i pulled out an exhaust manifold from a 73 duster 225. i have a 170 in my 66 valiant. i wanted to know if it will fit? the exhaust manifold from the duster has the choke like a C.and the choke from the 170 its like a full circle. can someone please help me out with some info!!