Search results for query: *

Need some advice on what direction to go with this thing. 71 Swinger 225 40K miles car was changed over to 2bbl setup before I bought it but it had a cheap aftermarket 2bbl on it. Previous owner supplied the Carter BBD but it needed a rebuild. I had it rebuilt and put on but now the motor...

I picked up a Blue streak (CH410) and rotor (CH303) from O'reilly the other day updating some things on the slant I just picked up. I noticed the rotor is bigger than the tan one I took off the car, and the cap seems like it is very tight (It took a little doing to get the side clamps locked...

Looking for advice on an air cleaner for the Carter 2bbl on my 71 swinger slant. PO put a tiny one on it and told me he tried putting a little bigger filter on it but it pressed into the under hood insulation.....what are you guys running with factory hood?

Thinking about adding their 2.5 inch system to my 71 swinger. I can't seem to find any vid's of slant's running with it....I think they'll let you choose what muffler you want as well....

Picked it up last Sept. plain jane no stripe hub cap 225 slant 904 7 1/4 car.....kind of boring so i decided i would get it running better and dress it up a little......what do u guys think? a work in progress, runs really good though for what it is...... 1973 Dart Swinger 225 /6

Ok so i pulled this thing out months ago b/c it was loose and banging around in there but can't find a freakin dipstick for the car! posted in the parts wanted forum but nothing....any of u guys have a good one that it tight in the engine? car is a 73 225 swinger and the stick is around...

Hello, I've been looking for part numbers on Napa, Advance, etc with no luck. 3.7 73 swinger with A/C and power steering, I need the A/C belt that goes around water pump, A/C compressor, and idler......thanks, factory belt is stretched and adjuster is all the way out....

73 225 swinger runs great except when at a stop when its warm.....in gear at a traffic light, stop sign, etc it will buck and miss, rpms drop, vehicle shakes. Could the idle just need to be bumped up a little? timing issue? 106K on the odometer, pretty much stock.....just does this under a...

So i keep seeing pictures of engine bay's with the freakin smog canister and want to delete mine.....what all is involved? looks like one line goes to the gas tank, and the others go to the carb.....can I just cap these fittings on the carb? what about the line going to the gas tank? this is...

I was chasing a rattle a few weeks ago under the hood and finally found that grabbing the oil dipstick and pulling it out a little stopped it, it almost sounds like it could be hitting the crank, but doesn't seem to have any marks on it....any idea's? engine is a 225.