Search results for query: *

What is the high pressure line supposed to look like on a 73 slant with a federal ( chrysler ) pump?? I had the pressure line on my slant spring a leak, took it down to the parts place and the one from a 73 in the computer didn't match what I had, but the one for a 74 did. Bought it and it...

Seems like every seam on my slant is leaking oil..oil pan, oil pump, drool tubes, fuel pump, timing cover, you name it, it's leaking. It's not a whole lot (just enough to get the engine dirty/wet). The question is how should I go about getting all of the leaks buttoned up on my daily driver...

I found a 833-OD LOCAL woo hoo. It's from an 82 van but I'm not scared. I talked to the guy last night and I'm heading down tonight to pick it up. It's not everything I need for the conversion but it's really cheap. He says he's got 2 bellhousings with it one alum and one steel for a v8. I'm...

This post will chronicle my turbo adventure and hopefully help anyone crazy enough to follow suit. I decided to start the post now so as I go along I wont forget anything and so no one has to wait :) I have a few goals and any project will suffer greatly if those goals change along the way or...

Ok I know this is nothing new to slanters but I'll be changing out the manifold gasket again to clear up a BAD ex leak at #1 cyl. I have a remflex gasket in there now but I must have torqued it down too much because it has "pulled" apart from the expansion of the ex manifold. I bought a fel-pro...

ok maybe this is a stupid question, but what should I ask for at the parts counter to get a mini-starter for my 73 /6 duster. or should I go pull one from a yard? I haven't changed out the boat anchor yet because it's been working fine until this morning when it started making a groaning noise...

Ok so I'm posting this in the /6 discussions b/c I'm sure no one would put one behind a v8. Questions are: how easy are they to come by? where might you find one? could you swap out just the internals or whole axle? I know the obvious question is not could you but should you. I don't plan on...

73 225 /6 duster. :scratch: ok so I had the engine running while setting up the stereo the way I like it and all of a sudden the oil dummy light came on, IMMEDIATELY shut off the engine and started the inspection. well it looks like the pressure sensor has oil all over it and the trail on the...

does anyone have a diagram for the vacuum lines for a super six? I've got a 73 duster still has the EGR valve and all stock emissions crap. the 2bbl is off a 79 volare but it seems that the carb has too many vacuum connections. oh and what model is the carb? or how can I tell? Thanks Matt

I'll be doing the super six upgrade here in a few months (quarters are going on now) What kind of manifold gasket are you guys using? Advance auto wants $198 (seems a little steep) Thanks

I was tooling around a yard today and just about to leave when a metallic blue front fender caught my eye.. upon further inspection it was a sweet 79 volare ( only thing I found wrong was a broken grill). I tried popping the hood and almost gave up when I saw the broken latch... after a few...