Search results for query: *

I have a 440 stroked to a 493 that is 10.5 to 1 compression and running a comp solid roller cam. It has an MSD distributor, ignition system and MSD high torque starter. I believe timing is set at 36 or 38 degrees and the distributor is locked out. The motor runs great and hasn't had any...

Well, installed my 470 Low Deck for the final time in my 68 Dart and tried we tried a different approach. The engine was in the car before for mock up, but didn't have headers at the time. The engine went in pretty easy for mock up, but we decided to try bolting on the headers and transmission...

Hello, I am looking to run a 4 hole tapered spacer on my 470 and had a question for the group in regards to phenolic vs aluminum carb spacers. I was looking at a Jegs phenolic spacer that says it is good with temperatures up to 400 degrees, which seems to be pretty high. This is going on a...

My 470 is heading to the dyno in the next few weeks and wanted to see estimates on numbers. Here is the details of the build: 400 low deck with eagle 3.91 crank and 6.760 Rods - balanced rotating assembly Ross Pistons - 11.2 Compression Ratio Indy SR Heads ported by Indy to flow 351 CFM @...

I am reaching the mid point of a 68 dart build and am looking for some insight. I had purchased a 470 locally as I know the shop that built it. The engine utilizes INDY S/R heads that were fully ported by Indy (Flowsheet says 351 CFM intake and 233.1 EX @.606) Bottom end is eagle 3.91 crank...