Search results for query: *

Saw these and figured I'd pass them along. ITB intake for $800 (going to require some work): http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=261453396009&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en Modman for $200...

I've had three failed voltage regulators since making the Hemi swap. First died when I first completed the swap. Second died 2 months ago when at a HPDE event at Texas world speedway. Third died yesterday when running with lights after a HPDE day. I'm guessing either the duralast part isn't...

Front cover with water pump, tensioner, and idler pulley $125 + shipping 6.1 intake complete - $600 + shipping obo 6.1 wrinkle aluminum valve covers. From 2006 ONLY. No bolts included $200 + shipping 6.1 coil packs - $75 + shipping I have various other parts...

Milodon 31003 pan with TTI headers (I'll be using the new ones that fit around the borgeson). Has anyone done it? Tested for fitment? Swinger - did you ask? Wade

What starters work with the TTI's? Thanks, Wade

Contemplating a few changes, so I've got to sell a motor (or two). 6.1 complete minus alternator. Includes 6.1 LX exhaust manifolds, coil packs, AC compressor, PS pump, Throttle Body, 6.1 intake, etc. etc. Missing Alternator. Can add that if you want (with correct bolts). 40k miles. Complete...

Finally dyno tuned my motor today. I'm very pleased. Picked the car up A LOT driving it home. Quick breakdown: 1973 plymouth duster forged 5.7, 11.6:1 compression, 03-08 GTP Extreme heads, Hilborn intake, custom shorty headers welded by me (around P/S box), 218/224 on 113.5+2 (xfi exhaust...

I'm going to outline my megasquirt install for everyone, make it easy for the DIY crowd. I chose the Megasquirt 3x, as it provides sequential fuel and spark, the fact that I can tune it myself, and the fact that tunerstudio has a 'self-tune' setting that will adjust the fuel tables to match...

I just measured the diameters on the water pump necks: Actual measurements, using digital calipers: top neck lip: 1.85" top neck behind lip: 1.75" bottom neck lip: 1.76" bottom neck behind lip: 1.65" (42mm? or 1 5/8"?) Not real sure what the right move is for what size lower hose to...

All Parts located in NW Houston / Cypress - 77433 Warhammer intake, $220 obo + shipping Mark Williams 90mm throttle body with FAST adapter - $320 + shipping Viper Brake kit for A/B/E bodies $500 + shipping ***SPF*** - includes used loaded calipers, new drilled and slotted 11.75" rotors, new...

Who's done it? Who has pictures? I searched a couple hours last night looking for the one set of pics I remember- couldn't find them! Any help would be appreciated. I started on my "notching" last night. I cut a lot out, to make sure I won't have any trouble pulling the valve cover when the...

Hopefully it won't be too difficult to make work! And my ported 6.1 intake is for sale. Gotta cover at least some of the cost! $1050 + shipping, no core charge

Figured I need to start posting up pics and updates for all to see. 1973 Plymouth Duster, bought new by my grandparents in 73 Motor - looking for 450+ rwhp: Forged 5.7 hemi- wiseco 21cc dome pistons, Eagle K1 rods, 6.1 crank. FRI Extreme 5.7 heads. Flow 360 cfm with factory 6.1 port volume...

I'm getting close with my build, and I'm debating what camshaft I want to run. I've got a 218/224 113.5+3 in the motor right now. 11.6:1 static, and 9:1 dynamic. I want power from 3000-6500/7000 for road racing. My 5.7 heads flow over 300 by .400 lift, and I've got a ported 6.1 intake on the...

These are all the hemi specific parts my buddy and I are not using. Need them out of the way. Everything is in Cypress (Houston) TX. Three (3) 6.1 cranks. $200 each + shipping. 5.7 intake, 5.7 fuel rails, 5.7 injectors. $125 + shipping. Throttle body, $25 extra - cover taken...

I know this isn't the For Sale section, but I wanted the hemi guys to see it. I have a set of Jeep SRT 8 exhaust manifolds I am no longer going to use. These fit great with the AlterKtion. I have the factory K member, and they hit the steering box and the torsion bar is kinda in the way...

I'd like to run shorty headers with my 5.7 hemi in my 73 duster. Has anyone found anything off the shelf that fits? Street and Performance wants $720 for a set. I'd like to find something cheaper. I'm also considering modifying the jeep SRT8 manifolds I have. That has been my plan up until...

What radiator are you using for your hemi swap? I've got a factory 26" radiator (was a 318 w/AC), and I was going to "upgrade" to an aluminum radiator with both necks on the passenger side. So far, I'm not liking my options. Factory radiator: 26x18x2" cooling area, 29.125"x2.5"x23.75"...

Hey fellas- I've got an opportunity at a 6.1 locally, TB to pan, that was pulled out of a jeep SRT8. 50k-60k miles. This guy bought it from the LKQ yard here, and it came with a 6 month warranty (I'm sure it doesn't apply to anyone but the first owner, though). He never put it in his LX...

Fellas- I've got a set of jeep SRT-8 manifolds- they don't fit with manual steering box and torsion bars (though they do fit on Tin's with the alterktion). I've seen some guys are running LX 5.7 manifolds? What about jeep 5.7 manifolds? And the truck 5.7 manifolds? What modifications...