Search results for query: *

I have for sale a new, still in the original packaging, Hurst line lock (roll control) button P/N 2483875. https://www.summitracing.com/parts/huu-2483875 I would like to get $20.00 for it plus the shipping. Ken Edison, NJ

I have for sale a very nice rear view mirror for the 72-76 A-body and the 72-74 E-body cars. The casting number on the base is 3695431. The mirror is very nice and is an excellent driver quality piece. I would like to get $20.00 for it plus the shipping. Ken Edison, NJ

I have for sale 2 turn signal levers with the bolts for the 67-72 cars. They are both in excellent shape with no issues that I can see. I would like to get $10.00 each plus the shipping. Ken Edison, NJ

SOLD pending receipt of payment. I have for sale 35 ½” length of Kirky ¾” thick, high dense black roll bar padding for 1 ½” diameter tubing. The half-round "C" shape covers one side of a tube between 1 1/8" and 1 1/2" diameter for driver protection. This was never installed as the roll bar...

I have for sale some used heater box parts that came from a 1968 Dart but will fit other year cars and models. Here is the list of parts: 16 clamps that hold the 2 halves of the box together. These are the larger ones. I don’t have the smaller ones that hold the cardboard onto the box. All in...

I have for sale a good used driver side fresh air box and door combination. It came from a 1968 Dart but fits the 1967-1976 year cars. When I got it, the door was very tight that caused the area of the box by the hinge frame to crack. It wasn’t broken so I epoxied some reinforcement to that...

I have for sale a used cigarette lighter that came from a 1968 Dart. The lighter part of this assembly didn’t work when test as the heating coil looks to be fried. The rest of the body and components are in great shape so if you just need to fill a hole in the dash, this would be perfect. I...

I have for sale an Autometer gauge mounting cup and clamp for use with the 2 5/8” gauges. These parts are excellent but unfortunately, the base that the clamp attaches to was too wide for the clamp to securely hold the cup and gauge. This is the Autometer P/N 3204 cup. I would like to get $5.00...

I have for sale 6 used bucket seat medallions from a 1969 Barracuda with the deluxe interior option. These have very little pitting and can hardly be seen from outside the car. They attach to the bucket seat back. The one picture that shows similar ones in place was borrowed from another FABO...

SOLD pending receipt of payment. I have for sale a very little used Auto Meter analog voltmeter gauge P/N 2645 that is in excellent shape. AutoMeter 2645 AutoMeter Z-Series Analog Gauges | Summit Racing This gauge has a 45 degree sweep and goes from 8-18 volts. It is 2 1/16” in diameter, has...

I have for sale a used pair of black sun visors that came from a 1968 Dart. They fit the 67 Dart as well. They are in good shape but one has the stitching coming apart. The vinyl on both visors is intact so just the one needs to be stitched. The tips need to be replaced though but they are easy...

I have for sale a very little used aftermarket headlight switch that came from a 1968 Dart GTS. From what I understand, this will fit the 62-76 cars as well. It’s in excellent shape, is clean and is ready to install. I couldn’t find and manufacturers P/N on it so I don’t know who supplied it. It...

SOLD pending receipt of payment. I have for sale a pair of used door jamb light switches that came from a 1968 Dart. From what I can see, these fit the 1964-1969 A-body cars. These were tested and they work. I would like to get $8.00 for the pair plus the shipping. Ken Edison, NJ

I have for sale a used Jeg’s roll bar helmet hook P/N 555-70032. It fit the 1 ¾” diameter roll bar tubing. It’s in excellent shape with no issues other than a little wear in the hook area. JEGS 70032: Billet Aluminum Roll Bar Mount Helmet Hook Fits 1-3/4" Diameter Roll Bars - JEGS It’s made of...

I have for sale a used parking brake handle attaching bracket from a 1968 Dart. This is the bracket that bolts to the bottom of the dash and holds the parking brake lever. It’s in excellent shape and comes with the original attaching nut. It’s clean and ready to install. I would like to get...

I have for sale a very little used Auto Meter analog voltmeter gauge P/N 2645 that is in excellent shape. AutoMeter 2645 AutoMeter Z-Series Analog Gauges | Summit Racing This gauge is has a 45 degree sweep and goes from 8-18 volts. It is 2 1/16” in diameter, has a black face and a red needle...

I have for sale a very little used 5-Point, Red, RCI, 3” wide driver restraint system. The belts expired in December 2023 so can’t be used for NHRA racing unless they get recertified. They are RCI P/N 9510B. These belts are in excellent shape with no issues at all. Just the expiration date. I...

I have for sale 6 used bucket seat medallions from a 1969 Barracuda with the deluxe interior. These have very little pitting and can hardly be seen from outside the car. They attach to the bucket seat back. The one picture that shows similar ones in place was borrowed from another FABO member...

I have for sale a few 12V lights for illuminating aftermarket gauges. They all work and have bulbs. Also, I have some brackets that hold the gauges to the mounting panel. The pictures show the gauge mounting stud separation along with the overall width of the mounting brackets. I would like to...

I have for sale a pair of parking brake pull lever return springs for I believe 70s A-body cars application. Both are in really good shape and are ready to install. The third picture is from another member who was looking for this same spring for his 72 Dart and shows the placement of the...

SOLD pending receipt of payment. I have for sale, 5 new, never used toggle switches with in-line fuse holders and fuses. https://www.grainger.com/product/LITTELFUSE-In-Line-Fuse-Holder-1-Poles-2FCN2 These parts are perfect with no damage that I can see. Included are 10 amp fuses for all the...

I have for sale a pair of door sill plates from Year One. P/N E43 that fit the 67-76 A-body cars. 1966-74 A B E-Body Flat Finish Sill Plate 1967 1976 A Bod... I put them in my 71 Demon race car a number of years ago and are still in excellent shape. The only issue is that the one that I had on...

I have for sale a decent, driver side, inside door bezel for the remote side view mirror. Casting number on the inside is 2999001. The chrome is in great shape and doesn’t show any pitting. The dark areas shown in the pic are just a reflection off of it from the furniture. Definitely driver...

I have for sale a very nice brake light switch that fits the 65-80 Dodge, Plymouth and Chrysler applications. This also fits many Ford and GM cars and trucks. 1261219 - 1955-90 AMC, Chrysler, GM, Ford; Brake Lamp Switch; with 2 Terminals; w/o Cruise Control; I tested it and it works like it’s...

I have for sale 5 used universal push button starter switches like the one in the link listed below. Summit Racing SUM-G1433 Summit Racing™ Pushbutton Starter Switches | Summit Racing They all work perfectly when tested, so can be installed and used right away. There are no issues with any of...

I have for sale a decent, driver side, inside door bezel for the remote side view mirror. Casting number on the inside is 2999001. The chrome is in great shape and doesn’t show any pitting. The dark areas shown in the pic are just a reflection off of it from the furniture. Definitely driver...

I have for sale 2 sets of interior arm rest attaching screws plus 3 extras. All are in excellent shape, measure 1 ¾” under the head, have been cleaned and are ready for use. I would like to get $6.00 for all the screws plus the shipping. Ken Edison, NJ

I have for sale a pair of new Kenwood 6” x 9” speaker grills and surrounds. I bought a new pair of Kenwood KFC-6966S speakers for the rear package tray area on a 1973 Duster and with the new tray and jute, the grills wouldn’t work. These have never been used or installed and are perfect. I would...

SOLD pending receipt of payment. I have for sale a pair of used Dual SBX694 illumiNITE 6 x 9 speakers. They measure 4 ½” total depth with 3 ¾” to the level of the mounting surface. They are 4 ohm, 150 Watt speakers that are in excellent shape and sound awesome. They aren’t damaged in any way...

I have for sale a set of black rear seat belts that came from a 1973 Duster. These are for the rear and are both left and right side. All the belts are in excellent shape with no issues that I can see. The retractors move freely both in and out. No tears or frayed edges on any of the belts. Also...