Search results for query: *

I have a clean 1970 440 HP dual snorkel air cleaner housing. The top has been cleaned and primed but the lower needs to be blasted and painted. I do not have a pie tin for it. Asking $75 obo plus shipping and it is located in Schiller Park.

I have a Weiand 8007 Action Plus 4 barrel Intake that was on my 360 for sale. Needs a real good cleaning but it's a great intake. Asking $75 OBO and the intake is in Schiller Park Il

I have a set of old M/T aluminum valve covers for sale for a smallblock. They are old and crusty so if I get $50 I'd be happy. If you want them let me know they are in Schiller Park Il

I have a 360 Block and heads I will not be using on my project so I figured I would let one of you guys get it. It's a 78 360 block with the cylinders bored to .030 and she is pretty clean very good block for a 408 I bet. There was a spun cam bearing so they will need to be replaced but if your...

Well Guys I need to get some money in my pocket to cover this crap. I have 4 14" Large bolt pattern rally wheels with 2 brand new tires and 2 old crappy tire that hold air for a few days. The wheels are rusty but I have the center caps but no trim rings. Asking $150 for all 4 with the tires and...

Well I have a set of mounts I made for my swap when I was going to use a stock K-member but since I'm switching to the Hemidenny super slammer k I will no longer be needing these mounts. I'd like to get $125 for the mounts they are a direct copy of the TTI mounts for new hemi swaps. Mounts are...

I have a set of really clean lower control arms with Strut rods and bushings for sale. Left over from my K-member deal if anyone needs them I'm looking to get $65 for the pair they are non sway bar arms. Located in Schiller Park Il 60176

I have a set of torsion bars left over that I won't be needing. They are 892R and 893L asking $75 obo located in Schiller Park Il 60176 These are 340 bars from what I've read.

I still have this and want someone who needs it to get it. I basically have an entire V8 swap for someone. K member, lower control arms, torsion bars, and strut rods out of a 72 Swinger. Asking $200 plus shipping for everything. Located in Schiller park Ill.

Parting out this aspen so the disc front end is up next. Asking $200 for the spindles, ball joints, and caliper core. I know the calipers are locked up so that's why I'm selling them as cores. Make me an offer if I'm priced to high I'm not really sure what they are worth. Located in Schiller...

I have a complete LBP 8 1/4 sure grip rear axle out of my aspen for sale. Appears to have a 3.55 gear or lower in it. Sure grip is tight, so tight I thought it was a spool when pushing the car. Looking for $200 drum to drum and I will throw in the cool slapper bars that came with the car in the...

I have a known good A-833 od with a smallblock bellhousing and a used but good clutch and a stock shifter for sale. Asking $400 obo to help fund my engine rebuild. Located in Schiller Park Ill. Need sold quick so cash talks.

Selling my trans still folks. It's an A-833 OD from a late 70's feather duster and an NOS aluminum bell housing. Asking $300 and it's located in Illinois

Hey Guys I am going to go with a different trans for my Scamp so I figured I would sell the one I have. I never ran the trans but was told it came out of a 74 Duster with 75k Miles. Shifts nicely on the floor and everything feel smooth. The Bellhousing was trimmed to fit the OD bearing plate and...

I have a 4.7 magnum engine SOHC out of a 2002 Dodge Durango with EVERYTHING harness, accesories, intake to pan, even the dash cluster and ignition wiring along with a 518OD trans and transfer case. Also I have a 1974 A-833 OD trans and bellhousing that has been modified to work with this engine...

My buddy has a block he was gonna build but he decided to go another direction so he's looking to sell it asked me to put it out there for him. The block has been sitting so it will need to be honed because of some surface rust in the cylinders but it was never run its a factory replacement...

I have a 1972 V-8 K-member out of a Dart Swinger. I will include the lower control arms, struts rods. $200 or best offer plus shipping. Parts are located in illinois.

I have a set of .895 V8 torsion bars $90 bucks for the pair plus shipping. Un known mileage bought them off the forums last year. Location Illinois

I have a full disc brake kit off of my 1974 Scamp with Spindles, Rotor, Calipers, Hoses, and 60% life left on the pads, Master cylinder. I will also include the lower ball joints with 30k Miles on them. Parts are located in Illinois.

I have a friend that just purchased a total at work and it has a good 4.7 Durango engine with complete harness/pcm, accesories, trans, ignition switch and dash harness, body control module and all needed stuff to drop into a car. Wondering if anyone would be interested in this stuff for their...

I have a complete 1998 360 Fuelie intake to pan with Dakota manifolds and wiring harness for sale. Engine had high miles and was knocking with low oil pressure when pulled. Will need a rebuild but you won't find a more complete engine then this. $400 Takes her home or I will trade for a set of...

So I might go in a different direction with my build andwas thinking of selling my Hemi. I'd like to get $1500 outof the whole shooting match which would include a 2005 car hemi with a 6.1 Cam and valve springs. Coils, intake,throttle body, modified wiring harness, pcm, throttle pedal and...

Hey Guys I have a complete 2000 dodge 360 Magnum out of a Durango that is complete Top to Bottom with wiring harness, intake, manifolds, and sensors. The engine spun a bearing but ran when pulled it will however need a complete rebuild. I will post this for FABO guys for 2 weeks before I list it...