Search results for query: *

Auto pedal setup from 73 dart. $20 + shipping slant 6 3/4 speed dust sheild set $20 + shipping SOLD!!! trans Crossmember from 73 dart works with auto and manual, not sure what years though. took the spool style mount. $20 + shipping. Will Bead blast and etch...

73 disc brake Power brake booster and brake brackets. Booster is about a year old and under 5k miles on it. Worked great. I will include all the brackets to convert manual to power brakes including the pedal rod thing. Looking for $80+shipping but, I will entertain other offers. Please send...

904 trans pulled from my dart was behind a 318, leaked about a half a quart every month or two. Leak is from the pan gasket and shifter lever gasket i think. Not sure of the mileage, but i put 3k miles on this transmission. It works great the only issue I had was when the transmission was cold...

New set of 8 318 rod bearings. These are sealed power bearings and are stock size NOT undersized. These were not run in the engine but i did have a few of them in the rods torqued to specs. I plastigauged a few of these bearings and realized my crank was .010 undersized :banghead: Here is a...

Slant 6 4 speed Over Drive bellhousing. This came out of a 76 feather duster with a slant 6 and 4 speed OD. Using all the other parts behind a small block so I don't need this. Looking to get $40 + shipping. but open to offers and possible trades I could clean, bead blast and shoot some...

I am looking to trade my small sector manual steering box for a large sector as the small sector wont work on my 73 dart. The box seems like it has no play and has no crunchy areas. I have the car half apart and would really like to trade this weekend to someone on long island. Someone help me...

7 1/4 a body rear end. Worked when pulled from car. comes with axles 2.90 gears (non posi). No backing plates or brake lines. I was told i couldent scrap the rear end as "they arent making any more". Id like to trade it for a case of beer or get 20 bucks for it. Other trades and offers will be...

I have a set of 8 3/4 factory, NOT aftermarket axles. These are small bolt pattern and come with the factory tapered bearings. Spines are straight, bearings felt tight before removed. One axle is missing its lug studs. I upgraded to BBP axles and dont need these. $60 for the pair Might consider...

Complete 73 front end. I even have a few extra parts including a nicer fender for the really rusty side. Ill let the pictures do the talking. Im located in huntington New York and this is local pickup only!!! Looking to get 200 but im very open to other offers and or possible mopar parts trades...

7 1/4 a body rear end. Worked when pulled from car. comes with axles 2.90 gears (non posi). No backing plates or brake lines. I was told i couldent scrap the rear end as "they arent making any more". Id like to trade it for a case of beer or get 20 bucks for it. Other trades and offers will be...

I have a set of 8 3/4 factory, NOT aftermarket axles. These are small bolt pattern and come with the factory tapered bearings. Spines are straight, bearings felt tight before removed. One axle is missing its lug studs. I upgraded to BBP axles and dont need these. $60 for the pair Might consider...

7 1/4 a body rear end. Worked when pulled from car. comes with axles 2.90 gears (non posi). No backing plates or brake lines. I was told i couldent scrap the rear end as "they arent making any more". Id like to trade it for a case of beer or get 20 bucks for it. Other trades and offers will be...

I have a set of 8 3/4 factory, NOT aftermarket axles. These are small bolt pattern and come with the factory tapered bearings. Spines are straight, bearings felt tight before removed. One axle is missing its lug studs. I upgraded to BBP axles and dont need these. $60 for the pair, will do local...

I have a set of 8 3/4 factory, NOT aftermarket axles. These are small bolt pattern and come with the factory tapered bearings. Spines are straight, bearings felt tight before removed. One axle is missing its lug studs. I upgraded to BBP axles and dont need these. $80 for the pair, will do local...

7 1/4 a body rear end. Worked when pulled from car. comes with axles 2.90 gears (non posi). No backing plates or brake lines. I was told i couldent scrap the rear end as "they arent making any more". Id like to trade it for a case of beer or get 20 bucks for it. Other trades and offers will be...

I have a set of 8 3/4 factory NON aftermarket axles. These are small bolt pattern and come with the factory tapered bearings. Spines are straight, bearings felt tight before removed. One axle is missing its lug studs. I upgraded to BBP axles and dont need these. $80 for the pair, will do local...

I have a set of 8 3/4 factory NON aftermarket axles. These are small bolt pattern and come with the factory tapered bearings. Spines are straight, bearings felt tight before removed. One axle is missing its lug studs. I upgraded to BBP axles and dont need these. $80 for the pair, will do local...

I have a set of 8 3/4 backing plates. They have everything on them. Brake pads look damn near new. I think they are 10 x 1 3/4 (see pictures). I was told the emergency brake cables are for a barracuda but im not sure, If theres a way to tell what they fit im all ears. These also come with a set...

I have a set of 8 3/4 factory NON aftermarket axles. These are small bolt pattern and come with the factory tapered bearings. Spines are straight, bearings felt tight before removed. One axle is missing its lug studs. I upgraded to BBP axles and dont need these. $80 for the pair, will do local...

front disc brake setup off a 76 /6 duster. Upper control arms, lower control arms, spindles, rotors, calipers, front sway bar no end links. All bushings are shot, calipers are good for cores maybe rebuilds, rotors might be able to be cut not sure. Looking to get $250 other offers will be...

front disc brake setup off a 76 /6 duster. Upper control arms, lower control arms, spindles, rotors, calipers, front sway bar no end links. All bushings are shot, calipers are good for cores maybe rebuilds, rotors might be able to be cut not sure. Looking to get $250 These are located in...