Search results for query: *

This is a hard to find carb from a 1970 383. It will need rebuilt or cleaned up. It’s not locked up, everything moves freely. $150 + shipping from Phoenix, AZ.

This was off a 1969 440 engine I had. Will need rebuild. The secondaries are stuck closed. Will need penetration oil and some finesse to free them. Or if you know a better way??? Pretty rare carb anyways. Still has the service tog too. $100 + shipping from Phoenix, AZ

Very nice original carburetor with service tag still in place. Was rebuilt years ago and never used. $250 + shipping from Phoenix, AZ.

Decent factory shifter from a 1972 340 Duster. The mechanism moves freely. The handle is okay for a driver but I’d suggest having it rechromed for a nice car. Comes as pictured with factory shift ball. $275 free shipping in the US

This is for 1970 up small blocks. No rot and no damage at all. Comes as pictured. Unless you don’t want the old fuel pump. I can take it off and chuck it. $80 free shipping in the US

Here is an old CH4B I used a little bit ago on a 440. One of the outside carb stud holes is buggered up/broke out. Could be fixed but I never bothered. I just used the inner carb stud holes which are fine. Most carb bases have the dual pattern anyway. $200 free shipping in the US

Nice set of pedals from a 70 Duster. Will work in all 1967-1976 A bodies. $200 + shipping from Phoenix.

This is in very nice condition. Came from a dry climate so no rust issues or pits. No dents or Frankenstein mods either. Just a clean housing ready for a new coat of black wrinkle paint and a pie tin. $250 plus shipping from Phoenix

Here is a pretty rare intake. These are an awesome upgrade on a 340 or any small block for that matter! This one is in good condition with no port work done to it. All 4 outer carburetor stud holes are helicoiled. It is ready to run as is. $350 shipped and insured from Phoenix.

Here is a rare intake. These are an awesome upgrade on a 340! This one is in good condition but has some erosion on the coolant passages. Nothing horrible or anything that would cause a leak. And all 4 carb stud holes are helicoiled. It is ready to run as is. $300 + shipping from Phoenix.

Here is a small block RPM intake. Only issue is someone hogged out the mounting bolt holes for some reason. No other modifications. Clean intake in natural aluminum, not coated. $250 + shipping from Phoenix.

In great condition. Could use a good scrubbing to look really nice! Great street intake even being a single plane. No corrosion or modified ports. $175 shipped

In very nice shape. No rust or massive dents. Correct for most 68-69 340, 383 and 440 cars. $200 + shipping

This intake is on good condition. Someone ground off the Edelbrock names but nothing else is modified. No corrosion or port work. The paint comes off with brake clean so a little paint striper will probably get it all off. $300 + shipping

This is a pretty rare intake nowadays. It is an Edelbrock LD340 and was made to be a direct replacement for the cast iron 340 intake manifold. This one has been modified to use a spread bore Thermoquad carburetor. If you want to run a square board Edelbrock or Holly carburetor, you’ll need to...

In great condition. Could use a good scrubbing to look really nice! Great street intake even being a single plane. $175 + shipping

In great condition. Could use a good scrubbing to look really nice! Great street intake even being a single plane. No corrosion or modified ports. $175 + shipping

I was going to use this on a project but I’m keeping the automatic instead. Yes, this is an A833. This transmission has been in storage a long time per the previous owner. Nothing broken internally. Probably needs gone through. Came from a 67 or 68 A body. $500 No shipping. Pick up in Phoenix.

Nice used intake. No alterations have been done. All mounting holes are good, no corrosion in the water passages. Bolt on and go! $300 shipped in the US Will be cheaper if you pick up in person.

Here is a pretty rare intake made specially for 1964-1965 273 engines. It has been soda blasted clean, not painted. The threads are nice and original, the coolant passages are not rotted out and no port work has been done. Only flaw on this intake is someone oblonged the mounting holes to use...

This carb was on a car I bought. It had an engine fire so the carb got a little burned but not horribly. Will need gone through but there are no locked up parts. Maybe use it for parts?? $60 free shipping in the US

This engine is currently in a running and driving car. It is being swapped out for a V-8. The engine runs well with no overheating, knocking, ticks and does not smoke. It has been parked for a little while so I would suggest cleaning the carburetor out and giving it a tune-up. The engine is in a...

This is a decent set of Edelbrock valve covers for big block Mopar engines. They look pretty good but would look even better with some steel wool. Comes with gaskets and mounting hardware. $40 + shipping

This was on a 383 HP Cop car I had a while ago. Im sure it will need a kit but it was a running carb. Still has all the correct linkage and hardware as pictured. Also, no frozen up parts. $225 shipped to you in the lower 48 and insured.

Here is a very nice 1966 and up 273/318/340/360 4 barrel intake. No corrosion, no screwed up threads, no damage at all! I believe the Offenhauser part number is 5700. Would trade for an Edelbrock Performer RPM for LA engine. $300 + shipping from Phoenix, Arizona.

Here is a new 4 barrel intake for low deck Mopar big block engines. It was in a water damaged box but it is unused. You can see there is no carbon build up in the heat riser and the threads are all nice! It’s just a little weathered looking. $220 free shipping in the US

Nice lightly used set of roller rockers for big block engines. They are 1.5 ratio, all of them. The rollers are all good. Included are the hold downs and ARP hardware. Sweet set of rockers! $400 shipped to you in the US

The car they are in hasn’t run in many years. Mileage is about 120k. Selling the engine and trans together from fan to tail shaft, carb to pan. It’s a 2 barrel 383 and still rotates fine. I will have them out either today or tomorrow. Pick up in Phoenix Arizona. $700

Don’t know what they came off of. Just had them in my spider shed for a long time. Not seized up, still move freely. I Don’t need em! Hopefully you do. $40 free shipping in the US

There are in my opinion one of the best looking vintage valve covers for Mopar engines. They are a little dirty but not cracked or damaged. They come with the mounting hardware as well. $150 Shipping will depend on your location.