Search results for query: *

Have a brand new freshly built race 904 and pct 8 inch converter. Never ran, All parts were bought through cope race trans and assembled by local builder. Cope speced all parts for a 700hp capable trans. -cope reverse manual transbrake billet valve body with 2nd gear launch option. -deep...

Have a brand new freshly built race 904 and pct 8 inch converter. No fluid in either ever. All parts were bought through cope race trans and assembled by local builder. Cope speced all parts for a 700hp capable trans. -cope reverse manual transbrake billet valve body with 2nd gear launch option...

Have a brand new aar 4.5 dual snorkel. Brand new, never mounted. Save wait and shipping. Will sell for 395 shipped or local pickup. Located in ct.

Selling a pair of 4500 1.875 bore, progressive linkages, 1325 cfm each throttle bodies. They are in new shape, appear to have never been run. Some light surface scratches from sitting around but very nice condition. Asking 1500$ for the pair shipped. Located in ct

Vintage set of jr headers that were blasted and heat painted. Had a few repairs that can be seen in pics. Has evac bungs welded in collectors. $100 pickup in 10549 ny or could ship at sellers cost. Would consider a trade deal, looking for milodon or kevko 360 pans

Vintage abody JR headers from the 70s that I sandblasted/cleaned up and sprayed in high heat black. Great for old school vintage look. 1 5/8 with 3 inch collectors. Header evac bungs welded in collectors. Matching 3 inch x pipe exhaust with bullet mufflers and turn outs before rear tires...

I have a brand new in box, never even put in an engine hyd roller cam, custom for a stroker magnum small block with ported heads. It was 560$ From bullet, build changed directions. Asking 425 plus shipping. Located 10549

Listing for a friend. A body 8 3/4 with 3.23 posi. 741 case. He is asking 1150 obo for it. Located near west Chester ny

8.8 rear out of explorer. Was in a duster with springs moved in. 31 spline stock axles with thicker tubes. tubes have been welded to housing. perches fully boxed/welded. Had ford motorsport posi installed with carbon clutches and aluminum cap support cover. 4.10 gears. Disc brakes in good...

Just putting a feeler ad to see if anybody is interested. I have a hyd roller that i ran at the track three times and some street driving. Was in a 360 with rpm air gap, ported edelbrocks and 1 5/8 headers, 3800 stall. Car went 11.12 at 121. cam specs are: comp cam 239 @50 intake 247@ 50...

Shifter and cable. shifter has one small scratch on front of ball shown in picture. Changed to a reverse valve body so new shifter going in. Will have this one out and ready to ship in about 2 or 3 weeks. $230. located near zip 10573 NY Hurst 3160009: Quarter Stick Shifter Chrysler TF...

i have an 8.8 rear with 4.10 gears, a ford motorsport posi with carbon clutches. aluminum support cover and disk brakes. Perches are welded on for moved in springs on an a body. the axle tubes have also been welded to housing. the rims are 15x10 holeshot holestars with 295 hoosier drag...

360 hydraulic roller used in my magnum. Was a grind from Scott brown. Don’t remember the exact specs but was around 230 at .050 .550 lift 110 lsa if I remember correct. I used this cam in a bone stock 5.9 magnum from the junkyard with an rpm air gap and 650, with 3000 stall converter and ran...

904 11 inch ptc 2800-3000 stall. Used it with a stock 5.9 magnum with a cam swap/intake and headers. Went 12.20-30s on motor, 11.15 on 150 shot with this converter in 3300 duster. $200 plus shipping located in new york

good deal for someone looking to get into turbos two twin 70mm .68ar masterpower turbos and a csu 750 blowthrough carb with an extreme velocity carb hat. turbos cost 600 each new carb cost 1300 plus new. hat cost 250 new will sell all for 1400$ thanks

complete a/c unit from california duster. will need rebuild. 75$ exhaust manifold from california emisions duster which is a special option-85$ obo-spring pads where the shocks mount to on the rear end-40$ obo in nice shape. located in port chester new york

like title says rear end was in 76 duster. rear end had over 100,000 miles on it but worked fine when last used. comes with drum brakes that are supposedly somewhat new. 2.9x gears. located in port chester new york. not really looking to ship but may be able to meet.