Search results for query: *

I have a pair of the original 273 V8 alternator brackets pulled from a junkyard years ago. They are basic painted steel and in restorable condition. These fit the engines with the cast iron water pump. $10 each set plus shipping from Northern California. PayPal Accepted. Thank you.

I have a clean 273 exhaust manifold for the left side. No cracks, no rust. Only one manifold, left side. Casting number visible in pictures. This manifold fits the 63-66 A body cars but will also work on 318 engines and the 67 and later A body models. $100 plus shipping. Paypal preferred...

I have a very nice 273 exhaust manifold that was originally in a 64-66 A body. No cracks, never modified. Also fits later A body cars but is designed to fit the narrow early A chassis. $110 plus shipping. PayPal is preferred or a check/money order. You decide. Manifold in in Northern CA I can...

I have a used steel 10.5" clutch cover for sale. This fits at the bottom of the bell housing to close off the area. It is a bit dirty but not rusty. It will clean up. Verify that the part number shown is the one that you need. $25 plus shipping. It is boxed up and ready to go. PayPal accepted...

I have several steel bellhousing shields for sale. They fit at the bottom of the bellhousing to guard against damage to the clutch and flywheel. $15 each plus shipping. PayPal accepted. Parts ship from Granite Bay.

I have several USED cast iron 90 degree oil filter adapters designed to fit LA series engines. These come with the hollow bolt and gaskets but NO filter. $25 each. I can ship them in a $15 flat rate USPS Priority box. Call it $40 total. PayPal accepted. Parts ship from Granite Bay, CA. Thanks you.

This is a Hurst chrome shift lever for use with 4 speed transmissions. $25 plus shipping. PayPal accepted. Part will ship from Granite Bay, CA.

I have a 4 speed shifter assembly that has no identifying marks or numbers. It has three levers and a unique mounting design. $40 plus shipping. PayPal accepted. Part will ship from Granite Bay, CA

I have several small parts for the clutch torque shaft mounting for individual sale. $10 each plus shipping. PayPal accepted. parts will ship from Granite Bay, CA. Thank you, Greg

I have three used clutch forks for sale. $20 each plus shipping. Please respond with the part number I show as well as the length that you need. PayPal accepted, parts will ship from Granite Bay CA. Thank you! #1: #2: S O L D #3: Thank you!

I have several manual trans Clutch linkage cross shafts, also known as Z-Bars. They are of different lengths. I will list them with pictures and NUMBERS. I ask that buyers please respond with the number and size of the one that you want so that you get the correct one that you need. Some have a...

For sale: Mechanical Adjustable rocker arm set from a solid lifter 273 engine. Original pushrods, set of 16. These are used parts in great condition. No defects. I cleaned them up a bit to look better. The shafts are banana grooved at the bottom. See pictures. These fit all LA series engines...

This is a stock crossmember that I modified to allow dual exhaust in a 1963-1966 A body car. Owners of these cars know that they were designed and built with single exhaust in mind. This crossmember has been cut and welded to allow a right side pipe to tuck up close to the body the same way that...

I have 4 of these LA series, 90 degree oil filter adapters for sale. The bolt is included and all come with the large round gasket that seals to the block. I may have the smaller gasket that goes under the bolt. $55 each, shipping included using a USPS $16 flat rate box. PayPal is preferred...

I have a handy little part that helps reduce spills when adding oil to your V8. These came on some vans, some trucks too. IT is a galvanized pipe that screws in place of the oil fill cap. The cap on top presses on to stay in place. $10 plus shipping. PayPal preferred. This will ship from...

I have a reproduction, Chrome UNsilenced 273 Commando air cleaner assembly. It measures 11" across and has a hose bib for the valve cover breather. It has never been used on a car. Chrome is nice but not perfect. I am including 2 bases. Both have 5 1/8" diameter carburetor mounting opening and...

This is a 2 piece stamped steel factory fan shroud for Valiant/Dart/Early Barracuda models. It is in good condition but will need to be cleaned up and painted. I may have the mounting brackets somewhere but let's assume that I do not. If I find them, I can mail them to the buyer later at my own...

I have a bracket used on A-B-E body cars that supports the vertical rod for transmission gear selection. It fits both 904 and 727 automatic transmissions. It is used but in good condition. See pictures. $25 including shipping in USA. Canadian shipping may be higher. PayPal accepted.Part is in...

I have a cast iron, single plane factory intake manifold for the 273 Commando or 273 Charger engine. It is dusty and grimy. It will need a good cleaning but it is in good condition. $80 plus shipping. I may have an original Carter carburetor for this. (needs full rebuilding) Paypal accepted...

I have a cleaned and painted bare housing for sale, casting # 741 as seen in the pictures. It has the main caps but nothing else. $50 plus shipping, PayPal is accepted. Item is in Granite Bay, CA 95746.

I have an A-Body width 8 3/4" axle for sale. '489 case with a 3.91 geared Cone type Sure Grip. This is a converted C body axle. The housing was narrowed, the axle shafts cut and resplined and the spring pads are at the correct 43" center to center measurement. It has the big 4 1/2" bolt pattern...

I have a recently rebuilt 46RH (Could be an RE) transmission that was used in a '70 Barracuda for a short time. The owner swapped to a 5 speed manual and pulled this trans out. It has been rebuilt with 618 internals designed for Cummins diesel trucks. It has a 10" 3000 stall LOCKUP converter...

Hello again, I have a 1977 440 V8 short block for sale, cast 4-2-77. It is .030 over with cast flat top pistons. External balance with correct balancer in place. NO camshaft. Oil pump/distributor drive is in place. I do have some '452 heads for this engine as well as '906 heads for an additional...

I have a running 340 4 barrel engine cast 2-7-72. .030 over. J heads, 4 barrel iron intake. Chrome valve covers, 90 degree oil filter adapter included. This engine is externally balanced and has the harmonic balancer in place. I can include a forged 273 crank for no additional charge if buyers...

I have a good running 383 4 barrel V8, cast 8-24-69. Comes with intake, exhaust manifolds, distributor and wires, alternator, water pump, A/C compressor, starter and all brackets. Engine was pulled from a 1970 Dodge Polara. I shot video of the car running using my own Edelbrock 600 carburetor. I...

I have one automatic trans floor shifter for a 1965 Plymouth Valiant/Barracuda. It functions properly and is not rusty. $30 plus $5 shipping in USA. Northern CA Pay by PayPal

These carburetors are all used and will likely need to be rebuilt. They were all stowed on shelves and need attention. Some are complete, some are missing a few small parts. *First is a 650 Spread bore, DP $35 *** SOLD **** *Second and third are 600 square bore, vacuum secondary. $35...

I have several Carter 4 barrel carburetors. These have been sitting awhile in a shed and will need to be rebuilt. Some are complete, some are missing a few parts. EACH carburetor is $25 plus shipping. ALL carbs fit in a USPS flat rate $14 box. Northern CA Pay by PayPal The following cars...

I have some lids and some bases to list. Each lid is $5 plus shipping. Each base is $5 plus shipping. Please be very specific when replying. Northern CA Pay by PayPal

I have a few more air cleaners to list. * One slant six ONE barrel air cleaner with all emissions/veacuum equipment. $20 (No pictures at present time) *One dual snorkle wrinkle finish unit. Both snorkles have been removed. I assume it is a 440-4 barrel unit. $25 *Black UNsilenced TOP. I have...