Search results for query: *

Got these in a rebuild kit from another member here several years ago but didn't need them as the mains on my engine needed .030 over. The box has water damage and the edges of a couple bearings have a little surface rust but it wipes off. They were like this from the other member. The rods...

Fan is from a 66 273 2bbl. It has been media blasted and ready for paint or powdercoat. Has 6 blades. Shipped from Colorado Springs 80918 $5 plus $12 shipping. Thanks!

Pulled out of 78 Magnum XE with a 360 and 904 trans. All linkage is there including: lockdown linkage, floor hump mount linkage, floor mount to trans linkage, trans bracket. The shifter knob needs a new center button as some schmuck over tightened it and split the threaded area....it's...

Pulled this carb over the summer off a 78 Magnum XE with a 360. It seems to be in okay shape and I think the choke linkage may be missing. Will definitely need a good cleaning and rebuild. Will ship from Colorado Springs, CO 80918. Letting it go for less than what I paid just to get it...

Have for sale a timing cover and bolt on timing tab for 67 and under SB engines. Came off a 66 273. Cover is greasy and still has gasket material on it. May need to be soaked in a 5gal bucket of cleaner or media blasted. The tab is in good shape as well and bolts on the bottom side of the water...

Listing for a friend as he acquired 2 but doesn't need this one. Story is, it was purchased for a build several years ago and when doing the mock up in the car, something about it wouldn't fit the chassis so they purchased something else. Not sure what about the chassis...friend says it was an...

Have a set of iron adjustable rockers with shafts and pushrods for sale off of a 273. These are going to be pulled right off a running engine and shipped to you. They will need to be cleaned. Adjusters are good as well. Shipped from Colorado Springs, CO $120 shipped to you door. Thanks FABO.

Have for sale the 273 from my 66 Valiant. Was pulled from a 66 Barracuda by previous owner, but I'll have to check the numbers to be sure. Engine has a 2bbl carb. Has a newer style waterpump on it but have the timing tab to put back on an original iron water pump. Currently still have the...

Have for sale (4) center sections for 8 3/4" rears. These are complete from gears to yoke. I would recommend a thorough cleaning and rebuild on each one. They are all out of trucks and are all "open." Have as listed: 2- 489 cases w/3.55 gear set 1- 489 case w/3.91 gear set 1- 742 case w/3.55...

Have for sale a matched SB single groove pulley set from a 71 318 w/aluminum waterpump with timing marks on driver side and no power steering. Crank pulley measures: 2 5/16" deep x 6 9/16" wide Waterpump pulley measures: 3" deep x 6 7/8" wide These have been media blasted and are ready...

Have for sale a matched SB single groove pulley set. Off of a 68 318 w/cast iron water pump with timing tab on passenger side and no power steering. Crank pulley measures: 1 13/16 deep x 6 3/16 wide Water pump pulley measures: 2 11/16 deep x 6 1/2 wide These have been media blasted and are...

Have for sale the water pump pulley and crank pulley from a 66 273 from my Valiant. Was on the fence about selling these as I was planning on rebuilding the 273 stock once I put the 318 in and put these pullies back on the 273 to sell the motor. Decided it won't matter, lol. Motor had the cast...

Have for sale a set of small block rocker arms and shafts that are in excellent shape and very very clean. These were off of an engine that appeared to have low miles and I believe these are the "heavy duty" Mopar replacements with the thicker pushrod socket cross sections. The valve stem...

Have for sale a small block single groove crank pulley pulled from a 318 in a 70 Dodge p/u. Has been media blasted so ready for powder coat or paint of your choice. Diameter measures 6 9/16" Depth measures 2.300 or roughly 2 5/16" Asking $25 plus shipping. Located in Colorado Springs, CO...

I can go take a looksee for anyone possibly interested in these parts. Post reads: Moving and don't want to move these parts. Some free others make offer. Just don't want to junk if someone can use them. 69 440 906 heads 75.00 69 440 intake and carb 50.00 Stock 69 440 727 torque converter...

Will probably never use these so thought I'd offer them here before CL or Ebay. They are a J head, but have no J cast into them. They do share the same casting number, but what's weird is, they are missing the 1 in "3418915" Both heads share the casting number "348915-A" Weird right? Not sure if...

Have had these big block truck motor mount brackets laying around for a few years from a project that I sold. I no longer need them. Should fit 74-93 Dodge trucks, both 2wd and 4wd if I remember correctly. They have been blasted and are ready to paint, powdercoat, or just plain hack up for...

I'm switching to another cam in my 318 build and have this Crane Energizer cam and lifter set new in box for sale. Lift is .454/.454 Dur is 216 @.050 Adv is 272....see spec card as well. Summit link: http://www.summitracing.com/parts/crn-150052/overview/make/dodge Cam is in Colorado Springs...

Got this Edelbrock 650 List# 1825 Thunder Series AVS Off Road carb w/dual inlet capabilities in a deal of parts and do not need it as I have a Holley 650 I'm using for my build. Carb is very clean on the outside and will squirt fuel as it had some in it when I picked it up. Was on a running 360...

Came off of a 170 /6 1bbl carb. Someone painted it red, I'm sure it used to be black. Good shape. Hate to throw good stuff away. $5.00 plus shipping. In Colorado. Thanks. Also have an instrument cluster from a 64 Dart 170 in interior ads.

Hey everyone, I'm selling a wiring harness out of a 64 Dart 170 slant six model. Its from the firewall connectors to the headlights and engine. Some of the connectors like sending unit and alternator, will need replaced and some wires have some bare spots on em, like in pic, but harness looks...

Got these with the original 318 that came out of the car....being the casting date on manifold and block are 70 I'm guessing they are for a 71. Appear to be in good shape, just need a good cleaning. The heat riser opens/closes easily as well. Casting numbers are easily visible in pics. Make an...

Hey everyone, have this intake that's in overall good shape, with the exception of one of the carb mount holes being heli-coiled. Don't think they make this one anymore?? Came with a motor I just bought and don't plan on using it. Too big. Ports have not been touched. I'm looking to sell...