Search results for query: *

This is a pair of used Clifford slant six headers for use with a high mount starter. They were on a 73 duster for a while and are in very good condition. Part # 55-0010. Price is $350. I’m located in San Jose, CA.

This is a Mopar 8 3/4 rear end housing that has been narrowed to factory A body dimensions. Housing is 52 5/8” end to end and 43” centers on spring perches. Located in San Jose, CA. Can deliver to spring fling if needed. Price is $500.

This is a mopar 8 3/4 housing that has been narrowed to factory A body specifications. Has new seals, and perches at 43” center to center. Price is $500. Located in San Jose, CA.

This is a SP2 P318 intake manifold with Holley carb. I believe the carb is a 650. Will probably need a rebuild. Price is $250. Located in San Jose, CA.

This is a Mopar 8 3/4 rear end housing that has been narrowed to factory A body specifications. Housing is 52 5/8” end to end and 43” centers on spring perches. Housing has new seals. Brakes are rebuilt and are 11x3”. These can be used when converting to the large 5x4.5” bolt pattern. What is...

This is a 8 3/4 large bolt pattern rear end from a 66 B body. Spring perches have been relocated to A body stock location (43"). It is 1 1/2" wider than a factory A body 8 3/4. Has new brakes and green bearings. Still needs drums and brake lines. Has an open 742 case with 2.93 gears...

This is a Mopar 8 3/4 rear end narrowed to A body specs. Housing is 52 5/8” and perches at 43” center to center. It is set up for running large bolt pattern axles with 10x2.5” brakes that have been completely rebuilt. New drums are also included. Has 741 open carrier with 2.76 gears. Just needs...

I have 2 Mopar A body housings available. One is a factory housing (unpainted one) that has some damage to the bottom of the center section. The other is a narrowed housing originally from a b body. It’s 52 5/8” flange to flange and 43” perches. Has been media blasted and painted. Does not...

I have a 8 3/4 489 case sure grip carrier with 2.94 gears. Came out of a 1969 Chrysler Imperial. Price is $650, located in San Jose, CA. Shipping is available also.

This is a Ford 8.8 31 spline rear end that has been narrowed to fit in a Mopar A body. Mounting surface to mounting surface is 56 3/8” and perches are 43” center to center. Has 3.73 gears with limited slip differential. All new brakes installed, new bearings and seals. Comes with factory u...

This is a Mopar A body 8 3/4 rear end minus axles. It was was originally from a b body and has been narrowed to factory a body specs. Spring perches are at 43” center to center. Brakes are 10x2.5” large bolt pattern and have been completely rebuilt and have new drums also. Center section is...

This is an early Mopar B body (65-67) rear end that measures 54 1/4” flange to flange. Spring perches have been relocated to A body factory width (43”). Has completely rebuilt brakes and seals. Center is a 742 case with 2.94 gears. Just needs new brake lines. Located in San Jose, CA. Price...

I have 2 aluminum slant six short blocks available. One is together and the other has the rods and pistons out. Price is $500 each, or $900 for both. Located in San Jose, CA.

I have several 8.8 rear ends all out of 90’s explorers with disc brakes available. $400 each for the unmodified ones which have 3.73 or 4.10 limited slips in them. I have 2 that have been shortened on the long side and have 2 of the short axles in them and new brakes. One 4.10 and one 3.73...

I have a factory small bolt pattern a body rear end for sale. It is complete minus drums. It is currently disassembled. Has a 3.23 open carrier. Price is $900, located in San Jose, CA.

I'm selling my 1968 Mopar 318 engine with transmission. Has been disassembled but all parts are there. Has new comp cams double timing chain and water pump. Two sets of heads. Comes with exhaust manifolds also. Was going to use it in my valiant but changed directions. Asking $350 for everything...

Selling a factory A body 8 3/4 rear end with new drums and shoes. Small bolt pattern. Has 741 case 2.76 open gears. Located in San Jose CA. $850

i have a 1975 mopar 400 engine block available for $400. One mounting tab broken but have the piece. Located in San Jose CA. $400

Selling my 8 3/4 housing, new LBP axles, backing plates and drums for $700. Located in San Jose, CA. Link to my craigslist ad has pictures. Mopar A Body 8 3/4 rear end Large Bolt Pattern

I have 3 free mopar engines available today and tomorrow only otherwise they will be scrapped. 2 are 383 big blocks from the mid 60's and the other is a 66 273 small block. The 383s are short blocks and the 273 is just block and crank. Also have a 4 drawer tool box available for free if...

I have a 273 commando engine from a 1965 Dart. I bought it last year from a member on here and have decided that I will not be using it. I don't know the exact condition as I haven't had it in a car. Price is $1000 and located in San Jose, CA.

Selling the complete engine, tranny and suspension out of my 65 valiant. I'm located in San Jose CA. Price is $600 for everything. All the info and pics are on my craigslist ad. http://sfbay.craigslist.org/sby/pts/5469892910.html

I have two factory mopar a body 8 3/4 rear ends for sale. Both have the stock small bolt pattern axles, brakes, and 741 open differentials with 3.23 gears. One housing has the perches in the factory location and the other has had the perches moved in for the spring relocation kit from mopar...