Search results for query: *

Since I don't have the V8 anymore I don't need to hold onto this. This was on my 383 when it was in my Dart. It is a 165A, 1 wire alternator from powermaster. It was used on my car for about 3 years before I pulled the motor. It is in good condition with minor wear on the pulley I was using...

I have for sale a brake pedal assembly removed from a '68 Dart. In good condition. $25 plus shipping. Paypal only, please.

I have for sale an 18 inch six blade fan and shroud. The shroud measures 18 by 26.5 inches and is a Mopar piece. Both in very good condition. Were installed on a big block Dart, but went to electric fans. $60 plus shipping. Paypal only please. Located in Merritt Island, Fl.

I have a flexplate removed from a 400 big block for sale. Has been cleaned and painted. $30 shipped. Located in Merritt Island, Fl.

I have the kickdown linkage removed from a 400 engine. This is just the bracket and linkage on the top of the intake manifold. Don't have the linkage that goes down to the trans. $60 shipped. Located in Merritt Island, Fl.

I have a Holley 2 barrel carb removed from a mid '70s 400. Clean. Probably could stand a rebuild. $60 shipped. Located in Merritt Island, Fl.

I have for sale an inspection cover (dust shield) for a 727 big block transmission. It is in very good to excellent condition. $25 plus shipping. Paypal only, please. Located in Merritt Island, Fl.

I have for sale a set of stainless steel transmission cooler lines, for an A-body/727 combo. Removed from my son's '68 Dart because we are installing a 4-speed. They are in near-new condition. $40 plus shipping. Paypal only, please.

I have for sale a driveshaft removed from a '68 Dart 383/727. It is approximately 47-7/8 inches center to center. It has 7290 joints with less than 5000 miles on them. The front yoke fits a 727/A833 and is 5 inches long. $75 plus shipping. Paypal only please.

I have a B&M flexplate for sale. Removed from my son's '68 Dart 383 because we're converting to a 4-speed. Installed for one year, nearly new. SFI rated, not the flimsy stock type..... Link to description: http://www.jegs.com/i/B%26amp%3BM/130/10230/10002/-1 $40 plus shipping. Paypal...

I have a pair of drum spindles and 10 inch backing plates from a '68 Dart for sale. They have been sandblasted and painted black. $55 for all shipped. Paypal only please. Mark Merritt Island, Florida

I have a set of connecting rods removed from a running 318 that had been previously rebuilt. Seven rods have the s/n 3418645, one has a partially legible s/n that begins with 28..... $25 plus shipping. Located in Merritt Island, Fl. Paypal preferred.

I have for sale a pair of Firm Feel's A-Body adjustable strut rods. They have never been installed. Bought these and then decided to go another route. These are $195 new from Firm Feel. $150 plus shipping. Paypal is preferred. Located in Merritt Island, Fl.

I have for sale an 1850 Holley 600 cfm vacuum secondary carb for sale for parts. The right rear mounting tab and PCV tube has cracked off. The carb was installed on a running 383 prior to its removal to install another carb. Good parts include main body, float bowls, all internals, transfer...

I have for sale a pair of large ball joint upper control arms. They have been installed on my son's '68 Dart for the last year, and were removed because we installed a pair of FF tubular UCA's. They have good ball joints and Moog offset bushings. They were sandblasted and painted with POR-15...

We parting out a running 318 engine removed from my son's '68 Dart. It has an Edelbrock Performer intake on it but is otherwise stock. A few pieces and prices are listed below. If you see something you want that isn't listed, PM me for a price. Prices do not include shipping. Edelbrock...

I have for sale a Champion 22 inch 3 row Aluminum radiator removed from our '68 Dart. The radiator is in fine condition, and was removed because we have installed a 383 and needed a 26 inch radiator. Includes the 5/16 inch inverted flare to standard flare fittings for the trans cooler. $100...

I have for sale the kickdown linkage and brackets from a 318/727 combo. The bracket that mounts on the back of the intake manifold has one of the mounting holes "modified", but it still works fine. $45 shipped. Paypal only, please. Located in Merritt Island, Fl.

I have for sale an inspection cover for a small block 727 trans. It is the older 2 piece style. Good condition. $20 shipped. Paypal only, please. Located in Merritt Island, Fl.

Manual steering box removed from '68 Dart daily driver. Box feels tight but definitely needs seals. Includes coupler. $65 shipped. Paypal only, please. Located in Merritt Island, Fl.

I have a manual steering shaft for sale, removed from a '68 Dart daily driver. Includes upper shaft bearing, clips and nut. Good condition. $30 plus shipping. Paypal only, please. Located in Merritt Island, Fl.

I have a set of throttle cable and return spring brackets off of a 383. They are in good shape, but could use a coat of paint. $30 shipped. Paypal only please. Located in Merritt Island, Fl.

I have for sale a set of power steering pump brackets for a Saginaw pump on a small block. Not sure what year. They have been sandblasted and repainted. $35 shipped. Paypal only, please.

I have for sale a Holley model 80457 600 cfm carb for sale. It has vacuum secondaries and electric choke. I got this carb with a motor I bought and just don't need it. I have not disassembled it to look inside, so I don't know the internal condition. Assume that you'll need a rebuild kit to...

383 coil bracket for sale. $20 shipped. Located in Merritt Island, Fl.

383 cast iron 4 barrel intake for sale. Serial number is 2951666-1. $60 plus shipping. Located in Merritt Island, Fl.

I have a pair of used 452 heads for sale. I know nothing about them.... they came in a box with a car I bought. Assume they will need a rebuild... Located in Merritt Island, Fl. $100 plus shipping. Paypal only, please.

I have 2 used windshield wiper switches for sale. The part numbers are 2820525 ('67 2 speed by p/n) and 3488839 ('73/'74 2 speed by p/n). I can't test these switches because I don't have a harness to connect them to and I don't have a schematic to check the contact continuity. I'll be happy...

I have a new Edelbrock 9265 insulating carb spacer for sale. It is the open plenum type. I opened the package just long enough to realize it was the wrong type for my app. Includes longer manifold studs. Never installed. From Summit it would be $20 minimum due to handling and shipping...

I have for sale 10 pairs of radiator transmission cooler line fittings that are 5/16 inch flare to 5/16 inch inverted flare. These are the fittings needed to connect your stock 5/16 cooler lines to a Champion radiator. They do not exist anywhere else....I looked long and hard when I bought my...