Search results for query: *

i have a brand new set of Magnum EQ cylinder head bare castings that I will take $550 and freight for. They cost $311 each from Summit and Jegs. Located in Louisville Ky. I'm going with a set that takes the LA intakes.

I have an Edelbrock Victor intake that is Jet Hot coated and has never been modified. Appears to be brand new. It's more than I need a for anything I'm building so I would sell it for $250 and freight or trade for another small block intake for either LA or Magnum motors. Located in Louisville Ky

I have a few of the forged steel Mopar Performance 4 inch stroke crank shafts brand new in the boxes, I have some with 318/340 mains P5007252. These are 4340 forged cranks made to be internally balanced. They cost $1085 at Summit And Jegs I'm asking $700 each. Located in Louisville Ky.

I have a pair of the Chapman ported Stage VI heads from Mopar Performance part P4876383. These are the bare heads and they cost $2475.96 Each at Summit or Jegs. Closer to $2800 each from MP. These have a raised intake runner which allows the use of an RB(440) intake on a B engine. They can be...

i have some Mopar Performance 4340 forged 4 inch stroker cranks for the 318/340 mains. They are part number P5007252. Summit and Jegs get $1085 for them, I'm asking $700. Brand new in the factory boxes.

I have a pair of the Chapman ported Stage VI heads from Mopar Performance part P4876383. These are the bare heads and they cost $2475.96 Each at Summit or Jegs. Closer to $2800 each from MP. These have a raised intake runner which allows the use of an RB(440) intake on a B engine. They can be...

i have a set of the W2 race heads that have never been assembled. They are the 65cc closed chambers for 59 degree block(stock small block) they also have new valves. I got these and a couple of other parts in a package deal so I really don't need them. PArt number is in pictures. Asking $900...

this is a brand new Mallory Super Mag 2 with the transformer will fit small block Dodge and if I'm not mistaken will also fit early hemisphere, 331,354,392. Asking $550 plus freight. It cost over $750 just for the magneto.

i have these KB107 Pistons that are brand new in the box that are .040 oversized for a 360. I was going to use them with a 3.58 stroke MP crank in a standard 340 block to make a 372 but right now I don't need any more small blocks. Cost me $275, asking $200 plus the ride.

i was digging around looking at my projects and I'm up to my butt in 4 inch stroke motors. It's time to liquidate some of this stuff and buy me a 572 Hemi. This short block is a 1978 360 block that's been bored .030 and honed with a plate. New cam bearings and brass freeze plugs are installed...

i have this Edelbrock Victor intake for a small block that is jet hot coated and never been ported or cut on. Like new. I'm never going to use it. $250. Plus actual shipping cost. Located in Louisville Ky

i got this Edelbrock Victor intake with a set of heads I bought and I won't be using it on any of my motors. Bone stock, never been port matched, looks like new. It has been HPC coated and is a very good looking intake. Located in Louisville Ky asking $300 plus shipping. New they are $325 and...

Maybe the wrong forum for this or maybe the wrong website altogether but I figure Mopar guys are Mopar guys so here we go. I have some really cool but really oddball one off racing parts for the early Dakota 3.9 V6. I will put a quick list and will be happy to go into more detail on specific...

I have a set of aluminum underdrive pullies that fit a 3.9, 5.2, or 5.9 magnum motor. I would like to get $75 plus freight. Dirty but not hurt.

I have a new Derale pan that fits the 904/999 torqueflite transmissions. They feature a series of cooling tubes that allow air to flow through the pan to cool the trans fluid. They work pretty good. I will take $75 plus freight.

I have this Winters shifter for the Dodge transmissions with a reverse shift valve body. These are great shifters and in addition to working much better than ratchet style shifters they have the cable coming out the back, away from headers and the other things that usually burn shift cables up...

I have a Wiend Team G intake for a 440 that appears to be uncut or molested in any way. I would like to get $150 and freight for it.

I have an Edelbrock tunnel ram that fits small blocks. Dual quad top. Great shape $250 Plus freight.

I have a nice Holley strip dominator intake for sale. Not ported or molested in any way. In my opinion this is one of the best small block intakes ever made. Asking $175 and actual freight cost or you can pick it up at my shop.

I have a brand new set of Headman Husler headers for A bodies number 75130 that fit a small block with W2 heads. Complete brand new with gaskets and plates and instructions and stickers. Heres what the catalog says Street & Strip Headers 1967-76 Dodge/Plymouth W2 in A-Body w/Sub Flanges...

I have a set of Diamond forged pistons to build a 360+030 with a 4 inch stroke crank.Part number 51026,they cost $720+ . I decided to build a 340 instead.All the specs are in the photo of the card that came with the pistons. If you need any more info PM me.I will take $550 plus actual freight cost.

I have 6 front hub/drum assemblies that fit a 1973 and up A body with small bolt pattern.These are NOS but are a little dirty from going to swap meets.Hard to find or as I like to say as rare as the people who need them.I will take $50 each plus freight.

This is sold...Heres one for you 273 guys.This is an Offenhauser Dual port intake manifold that fits the 273 engines with the earlier bolt angle. There are limited choices of intakes for thes older motors and finding one thats made to fit gets harder every day.If your not familiar with this...

P4876188 V8 Dual Plane Hemi Intake Manifold. Rectangle port and fits all hemi 426/472/528 engines. stock exhaust heat location on rear of manifold just like the original dual plane 4bbl production in-line manifold.Cost 237.00 brand new. This one has been bolted on but it has never had any fuel...

I still have this set of pistons available if anyone needs them.TRW 2316 forged 10.25 compression flat top with valve notches.I will take $100 for them plus freight.They look to be in pretty good shape and it looks like the valve pockets were slightly enlarged.Great for a budget 340 build.No pins.

I have a stack of slant six head gaskets and valve cover gaskets not to mention a whole bunch of bearings. If any is interested the head gaskets are $10,Valve covers are $5 and bearings about $10 bucks a set. I have to dig the bearings out to get the sizes.Of course you have to pay actual...

I have a 1973 340 cast crank shaft that I had turned a couple of years ago and I never got around to using it. I have the matching balancers for these too. I will look tommorrow and list the journal sizes. I might even have new bearings for these.Asking $125 for the cranks plus actual freight costs.

I have a harmonic balancer for a 1973 340 cast crank. Not the easiest thing to find when you need one. Asking $50 plus freight.

I have the whole floor section out of an A body with the console brackets,shifter and most of the rods to hook it up. If you want to change to floor shift you can use this.I'll take $100 plus actual shipping costs.

I have a Holley Street Dominator intake which is the Z style(because it was designed by Zora Arkus Duntov) which has the devided plenum and the pulse tube in the back.Good shape, just needs to be cleaned up a little. I'll take $100 plus actual shipping costs.