Search results for query: *

This was a big help to me, hopefully it will benefit someone else. As new condition. $275 shipped.

Pulled from a running car; last pass was a 10.14 @ 130. I changed up my combo to a gen 3 hemi, so I don’t need it. No wiring and no rubber mounts. New boxes are $800-900, but I’ll take $375 shipped.

Less than a year old, less than 20 miles of use. Changed direction on my build. $250, ground shipping included.

Derale 16913 14” pusher fan - $149 at summit Flowkooler 1700 water pump - $129 at summit CFV Racing SCRL1WP Water pump pulley - $73 at CFV Derale 13935 15” flex fan - $48 at summit All parts have 5 hours of run time, if that. All of it works as they should. $400 new cost. I’ll ship it...

Cam card says it all. Designed for staggered rocker arms. Ex. 1.6 intake 1.5 exhaust. Gross lift on card was meant for my combo of 1.7/1.6 rockers. I paid $400 a few years ago, only taken out of the box for inspection. $200 buys it and I will ship it to you (48 state ground).

Ordered it, was put on back order, forgot to cancel it and don’t need it now. Just arrived yesterday, so literally “brand new in the box”. I paid $118, they’re up to $123 and on back order again. Send me $75 and I’ll ship it to you! PayPal preferred. Thanks!

Gently used Moroso #63565 water pump. 464 street miles; works as new. Asking $350 shipped ground.

Brand new, in the box. Only taken out for inspection...never even near a motor. See cam card pic for the details. ***Valve lift is idicated as a 1.7 intake and 1.6 rocker combo. .595"/.605” is the lift with a 1.5 rocker ratio*** I paid $450 a year ago. For $300, I’ll ship it to you free!

Slightly used TTi W2 headers for BE bodies, or A bodies with coil overs. 1 7/8” tube with 3.5” collectors. Includes reducers to 3” exhaust and gaskets. Part #340BE17835-C4 These are not in perfect condition, few scratches and some stains on the lower tubes. Won’t be cheap to ship... $350...

Cooling Components #CCI-1730...has 2 speed motor. Google it for more info. I ordered the wrong fan, and after a year...no refunds. My bad...lol. Paid over $400 shipped... Do I hear $275, shipped?? Thanks for looking.

Brand new, never been on a motor. Includes pulley. PN 918454. 5.7 hemi truck application (not sure why the diff??) $125 ground shipped to you.

Brand new, in the box. Only taken out for inspection...never even near a motor. See cam card pic for the details. ***Valve lift is idicated as a 1.7 intake and 1.6 rocker combo. .595" is the lift with a 1.5 rocker ratio*** I paid $450+ this past summer... For $300, I’ll ship it to you free!

New, never used (unboxed for mock up only) Mopar Performance valve covers. They do not have the flat twist on fill caps, but I will include a MP twist on breather/cap and a Transdapt twist on cap for PCV placement; both also brand new, never used. No hardware, no gaskets. These are...

Torqueflite valve body, with pro installed Transgo stage 3 shift kit. Brand new, never run. $80.00 shipped

Title says it all. Brand new, never run. $65.00 shipped

Complete kit, less gasket. Never had fluid in it, just bolted on as a dust cover on a fresh trans build. $65 shipped.

Part #6100, with Blaster coil. Very low use on a street only car and checked by MSD 1 year ago; all was good! Wires are long and intact, includes rubber mounts also. This is a perfect ignition upgrade for a mild streeter/cruiser that doesn't need a rev limiter. How about $90 shipped to you...

B/RB/Hemi Fisher balancer. Anyone that remembers the Fisher balancers, knows of their quality. This one is brand new, never been installed as the pics show. It has some box/shelf dirt, but otherwise mint condition. Bolts still in original unopened bag. Asking $220 shipped to you, 48 states ground.

Nearly new Comp 1.6 roller rockers, small block Shivvy application, but good for the magnum/Edelbrock/EQ/RHS heads IF you take the time to fit them to the proper length stud. I have Olds studs (5/16 to 7/16) that you can have with, as a staring point to the correct length stud. Rockers, poly...

Mitler Bros spool, 8.75, 30 spline. Included are Timken carrier bearings. Brand new never installed. Both QUALITY USA made, no ebag junk. $120 shipped to you, ground freight.

360 motor for sale. This should be an EASY 11-second pump gas street motor. 74 block and OE crank. Block was jet washed, magged and checked for cracks. Bored to 4.030 and honed with plates. Decked and squared. New Durabond cam bearings. Machined and assembled by a well known Central Valley...

Hand ported Edelbrock Air Gap intake. Gained 33 to 52 cfm depending on the runner. All bolt holes are good, no damage anywhere. Ports were matched to OE heads, so there is plenty of room to port match to your bigger aluminum heads if you have those. Bottom line: Once jetting was optimized a...

Used, but not abused. No porting, not milled, no damage, all bolt holes good. How about $270, shipped to you? Lower 48 of course...

727 trans core for big block. Was removed from my 69 RR a loooong time ago. It shifted great with no slippage so all hard arts are good, but obviously needs gone through. Come and get it in Tracy, CA for $125.00

Tired of the CL crowd, so I thought I would try here... 73 440 with OE caps. Rough bored to.030, needs final hone to match your pistons. Fresh mag, no cracks, never over heated/blown up, never hurt. NICE block to start that wedge project. $250, located in Tracy, CA. $300 with brand new never...

Used on a daily driver for 38K miles, no damage with bolts. $80 shipped to the lower 48

PN 872037 ($209.97 at Summit) new in the box, still in the plastic. SFI 18.1, degreed. $170.00 shipped to the lower 48 states.

Okay, back on the market. Fresh blast, ready for your coating or paint. Baffles included. $90 shipped.

Title says it all, pretty much. Bought it from a trusted member on another board, but changed my mind on my small block build. EXCELLENT condition, no damage. $200 and I'll split shipping to the lower 48. BIG torque is what Erson told me. 246/252 @ .050 **It can be used in a Magnum, but you...

Small block Racer Brown solid cam STX-19. With lifters in order, very low use, excellent condition. 262 @ .050 duration .527 lift @ 1.5, .562 @ 1.6. BIG POWER with this cam! - $125 shipped to the lower 48 states. I bought this from a very trusted member on moparts, but decided to go hydraulic...