Search results for query: *

I have a set of Mopar Performance chrome valve covers for an LA small block. The chrome is real nice on these. I had to do a little welding on one cover, of some pin holes (see Pic). Don't know if it will leak or not. I think you can mount these so the weld will be on top, and not too noticable...

I have for sale a B & M Flex Plate # 10239. This is for an externally balanced LA 360, and 904 Tranny. This WILL NOT work on a Torque Converter with waits on it, For neutral balanced TCs only. I don't know how it got the spun ware on it, but its not ruff, I got it with a bunch of stuff I...

I have a Performer 318-360 Edlebrock Manifold for sale its in good shape all threads good.The center divider has been machined down some. $150.00 plus shipping from Wisconsin. Dave

For sale is a pair of 67 Commando Valve Covers. They are clean and ready to use. They have been black powder coated. They have 2 very small dents, but they are under the inside baffles. They have the original plug wire inserts, and nice aluminum fins. They can be yours for $150.00, plus shipping...

I have for sale an exceptional pair of 1967 SB Comando Valve Covers. They have been black rinckle powder coated. They have the original plug wire looms. The aluminum finns are in nice shape. Their are 2 small gliches in them, as noted in the pics. One is a small dent, the other a paint glitch...

I have for sale a set of small block cam parts, Used very little in a 75 360 back in the 90s. Complete set of valve springs. Complete set of hyd lifters, will be marked as to what cyl they came from. These have the snap ring, and not the wire clip. Double roller timing chain set, I believe its...

I have 3 aftermarket, and 1 Mopar, points dizzys for sale, along with points, condensers, rotors, and dizzy caps. All for small block. #1 Accel #34301T dual point with mech tach drive pick up. Excellent shape. $50.00 #2 Accel #30301S dual point. Decent shape. $25.00 #3Mallory #YL-579-HP...

Hello I have 16 Autolite AP5263, single platinum plugs, and a set of Denso # 671-8127 stock type plug wires for sale. They are for an 2004 Dodge Ram 1500, 5.7 Hemi. I bought them for my 04, but I traded it a week ago (wanted a newer truck LOL). These will not work in my newer 2015. They will...

I have for sale a 4 V intake from a 66 273 Formula S. I have cleaned it up, and you can bolt it on. All threads are excellent. Its in excellent shape. I will throw in the the choke well parts, as a bonus, if I can find them. $100.00 plus actual shipping from S E Wisconsin @ Burlington. PMs...

I have for sale a fixed 6 blade 273 SB fan, and aluminum spacer. I have blasted it epoxy primed it, and painted it gloss black. It came off a 66 B-Cuda Formula S. Just bolt it on. $60.00 plus actual shipping from S E Wisconsin @ Burlington. PMs welcome. barracudadave67

I have for sale a pair of 10 inch front "DRUM" hubs , and spindles, complete with bearings, and all hardware except axel seals. They came off a 66 B-Cuda Formula S. They are cleaned up. Left hub has L/H wheel studs still on it. I could not save the spindle mounting bolts. These assemblies are...

I have for sale a pair of SMALL BOLT PATTERN 10 1/2 inch rear backing plates, for 8 3/4 rear end. I have had them for around 20 yrs. I got them the way You see them, and they are in good condition. They are complete, with new shoes. One spring is missing, it is the long one, on the bottom of...

Merry Christmas to All I have an A-Body 8 3/4 axel housing for sale. It came from a 66 B-Cuda formula S. I welded new brake line tabs on it, and blasted it, epoxy primed, and painted it black. It is nice and clean. It is 52 5/8 in, outer flange to outer flange, and 43 in center to center, on...

I have a pair of 64-72 A-body lower control arms. They have been blasted, epoxy primed, and painted black. I have installed a set of new moog rubber lower control arm bushings. I also welded on a set of re-inforcing plates on the underside, of each. The T-Bar mounts swivel nice and easy. They...

I have a set of 11 Inch rear backing plates, and a bag of hardware for sale. Was going to use these on my project, but am going a different way. Plates are nice and clean, with parking brake, and adjuster rods. $100.00 plus shipping. PMs welcome. barracudadave67

Hey All I have a set of one (1) Breather, and one (1) chrome PVC valve, They were taken off a 66 B-Cuda Formula S, I scrapped out. I have cleaned them up, and repainted the breather. They are ready to install. The PVC valve is chrome, and has one dull area, that is hardly noticable. I will...

I have a set of nice 66, 273 Hipo valve covers for sale. They came off a 66 B-Cuda Formula-S. I have done all the dirty work on them, 36 year old dried up oil does not clean off easily, even in an industrial parts cleaner. They are cleaned up, and re-painted, and the aluminum fins have been...

I have a set of Accel 4040B plug wires for a small block. New never used. They have stright spark plug ends, and 90* distributor ends. their are 2 bags of dist ends. They are 8MM. $30.00 plus shipping, from SE Wisconsin. PMs welcome. barracudadave67

I have an air cleaner that was on a 66 B-Cuda formula S, hi-po 273. It has the correct base for Carter AFB 4-V carbs. It does not have the chrome over the element cover. This is the way It was on the cuda. I dont know if the top is original or not. It is not a cheap after market top, it is...

I have a new set of Accel 4040B universal 8mm plug wires for sale. They are blue. Never used. They come with all the connectors, and boots to make them fit. They have straight spark plug ends, and 90* distributor cap ends. $35.00 plus shipping from SE Wisconsin. PMs welcome. barracudadave67

I have a set of mopar marked date coded small block plug wires for sale. They have never been on an engine. They are around 25 yrs old. They are repops. Date coded H 1-68, marked Chrysler Corporation w/ the pentastar., and QM, and Electronic Suppression. These would be for you guys that...

I have a set of 7 1/4 rear shock plates. $25.00 plus shipping, from SE Wisconsin. PMs welcome. barracudadave67

I have a set of 7 1/4 rear axel shock plates, with a set of 7 1/4 U bolts. $ 35.00, plus shipping from SE Wisconsin. PMs welcome. barracudadave67

1-left side, and 1-right side door window regulators, taken from a 66 Dart Gt hard top. work good. $40.00 each, plus shipping. PMs welcome. Located in SE Wisconsin at 53105. barracudadave67

Good working heater blower motor, taken from 66 B-Cuda. $40.00 plus shipping. Located in SE Wisconsin. PMs Welcome. barracudadave67

Good working wiper motor, and linkage, taken from a 66 B-Cuda.$45.00 plus shipping, from SE Wisconsin 53105. PMs Welcome barracudadave67

#1, Heater blower motor with Squirel cage and mounting plate. Works good. $40.00 plus shipping. #2, Wiper motor and linkage, in good shape. I couldn't get it to run, but I don't think I new how to hitch up the wires, it might be a variable speed, and I already sold the switch. $45.00 plus...

I have a set of SMALL BALL JOINT upper control arms for sale. They have been blasted, epoxy primed, and painted gloss black. The ball joints i removed from them measure 1.780 in across the flats. asking $80.00 plus shipping from S.E. Wisconsin. PMs welcome. barracudadave67