Search results for query: *

I have a super nice pair of NOS exhaust tips. These have been in dry storage since the early 90s. 2883829 is the part number. They fit all 1968-1970 B-body models equipped with 426 Hemi, except Charger. They also fit 1968-1970 WS Coronet R/T models. The original boxes are different but they are...

Have a new Mopar Performance BB water pump housing and a Mopar Performance water pump. Both are new in the box. I don't believe the housing is available anymore, not sure about the pump. $200 for both plus the ride. P4529102 P4286900 I know 440source ones are cheaper btw....

I have a nice Edelbrock Performer RPM manifold for 440. Located in Louisville, KY. $275 plus the ride.

I have an NOS radiator for sale. It is a 2 row small block. Fits 70-73 B & E body cars and 70-78 Trucks, Vans, and Ramchargers. New in the box. Was purchased at the Mopar Nationals back in the early 90s and never used. Been sitting in dry storage for years. Located in Louisville, KY. $250 plus...

I have a fresh 416 complete small block with Indy 360-1 heads. Engine has an Eagle crank and H-beam rods. Wiseco flat top pistons zero decked. Heads are out of the box unported. I have flow sheet on them. Work great with the .590 flat tappet cam and the 1.6 rockers. Deep pan. Cometic head...

Pro-parts or Bob Mazzolini Headers to put a big block in an A-body. These are the best headers that I have ever used to put a big block in an A-body and an absolute must have for a raised exhaust port, such as Indy 440-1, in an RB with stock front suspension. 2" tube with 3.5" collector. These...

I have a 540 short block for sale. This is a World Products iron block made for Mopar Performance. It is 4.500 bore. The block was ran prior to this build and has been repaired by Ray Barton. Standard bore. Brand new Molnar 4.250 8-bolt knife edged crank, new Molnar H-beam connecting rods 6.76...

Gonna try this again before I go racing..... 340ci R-block engine: Mopar R1 block Brodix aluminum B1BA heads Callies crank Howard's aluminum rods JE forged pistons (13:1) T&D roller rockers Smith Bros pushrods Schubeck solid lifters Comp Cams custom ground solid cam Victor 340 intake 950 race...

NEW IN THE BOX....NEVER USED Part Number: P5249694 Harmonic balancer for 1962-1970 B/RB 361-440 forged crank engines except 1970-1971 4-bbl or 6-bbl with heavy rods. This is brand new in the box. Very beautiful balancer. These are over $400 new at Year One and Summit. Ill take $300 plus...

I have a nice used pair of TTI big block Headers for Mopar 440. Part number TTI440-218. These are $866 new. I'll take $600 obo. PM me here.... FROM TTI: Our Big Block "Step" Headers are constructed of 16 gauge mild steel tubing, mandrel bent on sophisticated computer controlled bending...

69 440 block, .055 over, main studed, main girdled, line bored, competition hone with deck plate, Mopar Performance 8-bolt crank, 4.150 stroke, Eagle H-beam rods, Ross flat top pistons, chrome 7 quart pan, chrome timing cover, double roller chain, Fluidamper balancer. No valvetrain, heads...

I have two 489 units for sale. One is just a case and the other is complete with a spool and 4.10 gear. The gear is broken and needs replaced. $250 for all plus shipping.

340ci R-block engine: Mopar R1 block Brodix aluminum B1BA heads Callies crank Howard's aluminum rods JE forged pistons (13:1) T&D roller rockers Smith Bros pushrods Schubeck solid lifters Comp Cams custom ground solid cam Victor 340 intake 950 race Holley carb Milodon pan ATI superdampner Moroso...

I have a set of Edelbrock BB RPM cylinder heads that I bought from a Moparts member and ended up not being able to use. I was told these heads had less than 25 runs on a mild engine that was in a dragster. He also said that they have one piece Ferrea valves and Comp 10* locks and retainers and...

I have new front and rear Wilwood disc brakes for sale. The fronts are for an A-body with 10" drum brake spindles. Rears are for 8.75 or Dana 60. I purchased these from a Moparts member and never used them due to selling the car I was gonna put em on. Rears have been mocked up but never...

I have a brand new Strange S60 housing that is not even assembled yet. You can make it any length you want. The center section, tubes, and ends are not welded together. It comes with a pair of Moser axles that are Mopar b-body length but can be shortened and resplined for different...

I have a pair of under chassis headers that fit A-body small block W2/W5 cylinder heads. These are 1 7/8 tube with 3" collectors. Not sure of the brand but a buddy says they are early era Hookers. They come apart in several places which is very common place Hooker design and makes them very easy...

I have a 340 that is now 398. Mopar performance 8-bolt 3.79 crank, Eagle Rods, Ross forged pistons. W5 Cylinder heads (blue plug) that are mildly ported. Mopar 590 solid cam. Will run on pump gas. Engine has about 40 passes on it. Went 6.50's in a 3100lbs Dart. Drop in and go racing or build a...

I have two pair of super stock leaf springs for an A-body. One pair are the old 002/003 springs (non-Mexico) and are the best ones to get. The other pair are still on a wrecked Duster that I just bought and I have yet to remove them to see if they are the new or old ones. $200 a pair. I would...

I have a nice pair of Moser axles with green bearings and 5/8 wheel studs. These are 26" long which are 2 inches shorter than stock A-body length. They are 30 spline. $350 plus shipping.

I have a new rotating assy for sale to build a 500 ci 440 RB engine. Diamond flat tops Eagle H-beams Cat 4.150 stroke billet crank All new....$1500 plus the ride.

I have a new Cat 4340 Stroker crank for a 440. This is the crank needed to make a 500ci engine. This is 4.150 stroke, 2.750 mains, 2.375 rods, internal balanced, has a bob weight of 2550g, 6-bolt and used with a 6.76 rod. Brand new in the box. $475 plus shipping. CAT forged 4340 steel...