Search results for query: *

Have a set of late 225 .010 rod bearings that i bought out of mistake, was looking for earlier bearings. Asking 20 plus shipping

Have 2 holley carbs off slant 6s that i have no use for them anymore. First one installed a rebuilt kit in it, ran good till started having issues with idling. Tried to fit still had the problem. Unsure what the problem is. Selling for 50 bucks plus shipping ir local pickup Second one came off...

Got a smog pump that came off my 72 dart with 225 slant 6 asking 20 bucks plus shipping Part located fresno ca

Have a set of 273 rocker arms for sale. Had it for a project that never went through. Had it soaking im purple power fir about a week and pressure washed the **** out of it and wd40 it. Asking 200 shipped in US of Ahhhh. Part located fresno ca

I have I’m pretty sure it’s a 46RE 2wd out of a Dodge Ram that was bolted up to a 5.2l. selling as a rebuildable core. Will come with torque converter. Front pump needs to be replaced due to a bearing/bushing being fried and Front band is fried, didn’t go far enough to check the reverse band...

Got a set of used .040 over piston/rod assembly. Some have pits and scratches. Would be good for replacement pistons or doing a cheap build. Asking 40 bucks and that includes shipping.

Got a set of 4 mopar performance gauges with the pentastar logo on it; tach, speedo, water and oil pressure gauges that I’m not gonna be using so might as well sell them. 3 of the gauges, tach, water and oil are new however missing the hold down brackets on the water and oil gauge. Speedo is...

Got a 1965 273 forged crank that needs a new home. I believe it came out of a barracuda. Still standard size on rod and mains. Does need to be turned since it got surface rust, or might just need a polish. Just collecting dust so Asking 20 bucks for it plus shipping. Part located Fresno ca.

Have a Holley carb that came off 70-74 413 from looking up the list number which is 6909. Probably needs to be gone through. Also will come with 9” K&N air cleaner assembly Asking 50 bucks. Parts located Fresno ca but can ship

Have a set of stock 273 pushrods in great shape. cup/ball style Length are 7.5” asking 20 bucks for it plus shipping Located Fresno ca. Do take PayPal

Have a 904 out of a 65 Dart gt that shifted good when removed. For slant 6, Trunnion driveshaft style and shift cables were for center console shifter. Comes with torque converter and dipstick tube, no dipstick tho, Asking 40 Small block 727, don’t know what it came out of. no valve body or...

Have a few parts that I have no need for them anymore and that my wife is complaining about soooo yeah need to sell. Carter Thermoquad 6-2146 Need rebuilding - 20.00 170 slant 6 1bbl carb, intake and exhaust manifold - 20 for all 318 2 bbl intake, carb and air cleaner - 20.00 for all 318...

Selling a 90 degree oil filter adapter that came off a 273. Not sure if there original to the engine but that’s what it came off of. Has been braze repaired before from previous owner. Just cleaned up the brazing. Asking 25

Selling a set of used 170 .040 over piston rod set. Has little pitting on some of the pistons. Would be good for a cheap rebuild. Asking 50.00 Parts located central California king city area.

Selling a 8 3/4 out of a 64 Dodge polara. 741 case highway gears. Gears look to be in great shape. was gonna use it for a project but sold the car and just collecting dust now. Asking 300 obo local pic up only or can deliver within 100 miles of San Lucas Ca 93954

Have a few parts for sale that i have no use for anymore and just collecting dust Edelbrock 340 torker single plane intake in good condition asking 100 OBO New Performance Camshaft XE268 for 318 with new hydraulic flat tappet lifters, seling for 120 (SOLD) 273 timing cover, this...

Have an extra set of Kelsey hayes Hubs and rotors, rotors still have a good amount of life in them, centric rotors, and hubs are in good shape just studs needs replacing This is a separate set from the other ads im posting sbp. asking 60 + shipping Parts located near king city ca do paypall...

Have a spare Kelsey hayes disk brake setup off of a dart that I don't need, just taking up space. set includes calipers, worn tho and don't have the cross lines, definetly needs rebuilding or I believe you can buy new ones from rock auto, spindles backing plates, fairly new centric rotors with...

Selling a FMJ disk brake setup, was gona use it on my dart but since I had the Kelsey hayes setup and did the mustang rotors I have no use for them. These are the large rotor style disk brakes. no upper control arms or prop valve, just spindles rotors calipers, basically what you see in the...

Selling a Kelsey Hayes disk brake setup! Spindles and hubs are in good shape, rotors are fairly new centrics, calipers probably need rebuilding missing small hard lines that connect the 2 halfs together on both of them and also missing one tab that holds the brake pad in, no bearings, does come...

Selling a Kelsey hayes (sbp) disk brake setup that I got off a 72 duster Comes with what you see in the pic. Missing the hard lines tho that connect each caliper half and one brake pad retainer clamp thingy on one of the calipers. Both rotors are 1 year old Centric rotors that are off my kh disk...

Selling a long block 273 out of a 64 dart. block is still standard, needs to be bored out, crank is still in good condition, just needs a polish, forged crank, standard rod and mains on that. Cylinder heads needs a go thru. Don't have the adjustable rocker arm assembly tho, just the ball on cup...

Have a set of disk brakes off of a 86 fifth avenue, was gonna used it in my 72 dart but decided to stay with the Kelsey hayes setup, whole assembly is still in good condition, comes with calipers, spindles, rotors, brake lines, backing plate, brake pads, and bearings. Still assembled, will post...

Selling early 1964 273 forged crank w/harmonic balancer, floating connecting rods, and used clutch thingy 23 spline which i dont know if they are valuable or not. crank is standard on both rods and mains and in good shape, just needs polishing. - Asking 80 bucks for all of that 2bbl intake +...

Selling a buildable standard bore 1964 273 for 160 bucks, comes with standard forged crank, in good shape just needs polishing, timing cover, new set of standard piston rings, oil pan, oil pump w/side adaptor thingy, valve covers, cylinder heads, (no rocker arms tho), stock forged crank, stock...

Selling a set of 273 cylinder heads from a 64 dart. Both heads are in good shape needs cleaning, not rusted. on one of the heads tho 1 exhaust valve was burnt. Asking 150. Also have the adjustable rocker arms from the 273. asking 100 with ball on cup pushrods and also have another set of ball...

Selling a complete set of stock adjustable rocker arms w/shafts, spacers, bolts, and also 16 pushrods off a 1964 273 solid lifter cam engine. asking 150 + shipping Location: Glendale, AZ 85303

Selling a set of disk brakes out of 77 plymouth volare, bbp, comes with spindles, calipers w/pads and rotors, bearings, backing plate, brake lines, and proportioning valve, rotors are in great shape and pads still have alot of meat on them. No upper control arms or lower balljoints tho. Asking...

Selling a front disk brake assembly from a 77 volare, it includes spindles, rotors, calipers and brakets, brake pads, brake lines, backing plate, and bearings. Rotors are stock size thickness, one of them has little scaring on the back part, brake pads have plenty of meat on them, bearings need...